Question to anyone with an EG/DC chassis.
Currently doing a brake line tuck in an EG Chassis.
I'd like to know whether or not it matters how the brake lines are routed to the prop valve.
If you look at this pic below, it is routed one way (OEM I believe)
However, I went ahead and did some more research and noticed these are routed differently then above
My main concern are the four (4) lines coming into the prop valve. Two from the BMC and the two that go to the R/L brakes. Just want to make sure they can be routed either way or if it has to be done the same as OEM
Currently doing a brake line tuck in an EG Chassis.
I'd like to know whether or not it matters how the brake lines are routed to the prop valve.
If you look at this pic below, it is routed one way (OEM I believe)

However, I went ahead and did some more research and noticed these are routed differently then above




My main concern are the four (4) lines coming into the prop valve. Two from the BMC and the two that go to the R/L brakes. Just want to make sure they can be routed either way or if it has to be done the same as OEM