[AdEgk20]

well im runnin an k20a2 in an eg with an prc ecu(type r)and i have an fuel regulator and i was wondering what psi is it supose to be.stock motor also.

 

[jdgn]

Standard pressure is usually at 43.5 psi or 3 bar

 

[import_trung]

Standard pressure is usually at 43.5 psi or 3 bar

is it?? last time i read. it was 57psi. these k motors need more than a b series.

run a stock b series pressure reg without the vacuum line on it, and see what u get, thats the pressure a k series needs.

 

[drhonda]

I run mine at 55psi

 

[AdEgk20]

I run mine at 55psi

have u ran it in a quarter mile to see ur time yet?thanks about tha fuel ill try it.

 

[iwilson]

The correct fuel pressure is 3.5 bar or 50psi.

 

[2fastxeg]

stock motor is good at 51 PSI... our itb's are set at 53 psi...

 

[TeamPacman]

50-55 is fine...

Tune it and you'll see...

 

[AdEgk20]

thanks guys anybody ran in quater yet?

 

[T-Charged-Civic]

what's the fuel pressure should be in idle, and what's pressure in driving ?
thanks, Avi.

 

[iwilson]

It should be the same from idle to max rpm.

 

[98specR]

is it?? last time i read. it was 57psi. these k motors need more than a b series.

run a stock b series pressure reg without the vacuum line on it, and see what u get, thats the pressure a k series needs.

that's a pretty cool piece. it's cool how it allows one to remotely mount a b series fpr. but my question is. does it cost less than a universal fuel pressure regulator?