Honda / Acura K20a K24a Engine Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
my engine somethimes stalls in neutral when i leave it running
it go's out like you just turn the keys off but they are still on ?
anyone got experience with it ?
car is modded and chiped
 

· Premium Member
Joined
·
640 Posts
The TSX isn't sold in Europe, so you have an Accord with a K24A2 swap? You can't "chip" a CL9 ECU, if anything, it would be re-flashed. Unless your ECU was re-flashed by Hondata, then it likely isn't even re-flashed.
 

· Registered
Joined
·
544 Posts
The TSX isn't sold in Europe, so you have an Accord with a K24A2 swap? You can't "chip" a CL9 ECU, if anything, it would be re-flashed. Unless your ECU was re-flashed by Hondata, then it likely isn't even re-flashed.
in Europe all uses Accord CL9 with K24a3 ;) There is no need to import TSX :) Question if thread owner has real Acura TSX.
 

· Registered
Joined
·
324 Posts
The TSX isn't sold in Europe, so you have an Accord with a K24A2 swap? You can't "chip" a CL9 ECU, if anything, it would be re-flashed. Unless your ECU was re-flashed by Hondata, then it likely isn't even re-flashed.
in europe we have companys that solder a new port onto the ecu and map it that way. its not fully tunable but the tables can be altered, kind of like a remap.

whether ot not he means this i dont know.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top