Honda / Acura K20a K24a Engine Forum banner

the throttle cable thread.

5973 Views 26 Replies 13 Participants Last post by  adirondackR
Well, now im trying to address a problem i have with my throttle cable, it jsut seems too long and the pedal feel is very sloppy,

k20eg bent the gas pedal up to compensate for this so the t-body will open up asll the way,

but its almost impossible to heeltoe with the gas pedal 2 inches further out then the brake pedal.

so once again i called hasport today and they told me that i need to use a eg throttle cable to remedy this, because its shorter but will still work, when i talked to joe he said that they were going to try it out at ther shop and im going to call tomorrow to see if it solves this slight problem.

i already got qouted 15 for a new one from honda so its not a big deal, i just have to do something to make pedal feel better

as you can see by the pics the cable is as tight as it can be and still has too much play in it

See less See more
1 - 1 of 27 Posts
supafly said:
Im in awwww at this gas pedal thing.

Looks like a HUGE F'ING HACK JOB. Hope you didn't pay for that.

I have an eg. But I simply used a throttle cable bracket from an EK SOHC and used spacers off the TB and it works awesome.

AS we can see hack jobbb, but nice RRRR carpet, damn its ripped :?
im saying use EG one

Peace n good luck
1 - 1 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.