Honda / Acura K20a K24a Engine Forum banner
1 - 11 of 11 Posts

·
Premium Member
Joined
·
456 Posts
eternalek said:
what no info on those, who makes them ?
Nitro Drive line, but it will be special order for the inner pieces.
Able to withstand 1000hp chrome moly steel steering knuckle 6lbs lighter too.

The Moore Performance system includes two chrome-moly knuckles complete with bearings and four- or five-lug hubs, two axles, spool, complete front brake system and intermediate shaft. All these components are designed as factory replacement pieces to fit most popular Hondas.

The replacement knuckle is constructed of 4130 chrome-moly and is a direct replacement unit. The piece is 6 lbs. lighter and the chrome-moly makes it just as strong, if not stronger than the OEM knuckle. The lightness of the knuckle is an added benefit of the piece, as its main purpose is to accept the larger 930 outer CV joint. This larger unit is unable to clear the factory ball joint. The new knuckle drops the lower ball joint by 0.25 inches, which also aids in straightening the lower control arm.

OEM axle spline density comes in at 1.125 x 28-spline, while the Moore Performance axle is rated 1.4375 x 33-spline. OEM axle shafts were also swapped in favor of 300M 1.4375 units. With the larger shafts, added weight was the only problem with the new units, so Moore Performance rifle bored the axles, adding much more strength and less weight to the system.

The 300M material is only a portion of its durability because 80 percent of its strength comes from the special Moore Performance heat-treating. Axle shafts, spool and CV joints have all received this treatment and it's the key to the components' strength.


Moore Performance
(619) 296-9180
 

·
Premium Member
Joined
·
456 Posts
99blackcivicsi said:
all i can say is buying those axles for street use is FUCKING STUPID have fun braking shit, you will find out what i mean after you get them.
99blackcivicSI, talking about things you dont know? Your just making yourself look stupid. They are for street use and there also OEM replacements.
I dont know what so fucking stupid about buying stronger axles and steering knuckles.
 

·
Premium Member
Joined
·
456 Posts
99blackcivicsi said:
Sorry buddy but what is chromoly do you know why they don't recommend chromoly to use on the street because it cracks plz i'm not the one looking like a fool i have been around imports for a long time and been around cars since i was born, so plz don't attepmt to bash when it is you that looks like an idiot thank you
Right the 1000hp rated axles, cracking on street use :roll: .

Chromoly he says the material thats also used on rod bolts and mains and rods themselves with some grades at 190,000 psi.

4130 tensile strength 95,000 psi, more than twice that of 6061 T6 aluminum.
 

·
Premium Member
Joined
·
456 Posts
99blackcivicsi said:
wow sorry didn't know i was talking to a fucking genious, do you know why cromoly isn't recomended for cages in STREET APPS! same reason i DON"T recomend them for suspension because it is brittle and BUMPS on the road WILL crack it. Don't listen to me buy whatever you want i just don't think it is work the money on a !STREET! car.

On a lighter note Mark Williams drivetrains has a better setup IMO same type of axles but comes w brakes also for about the same price as Rob's stuff. Great for the track not for the street. Just trying to save you a headache later on
You need to stop cursing excessively.

Right... and the stock ones are stronger :?

These are for Road Racing, Street, Pro Drag hondas etc. No news on them breaking from so called ''bumps'', in NHRA prodrag/Roadracing racing there is more serious shocks, bumps and serious loads than from the street .
The Racers that are using his driveling components are faster than they were before.

Lots of good news. I know what you mean about the brittleness about chromemoly (this is 2004) metal like this after being machined on should be cyrogenically treated. :roll:
 

·
Premium Member
Joined
·
456 Posts
99blackcivicsi said:
You apparently don't listen you are stuck in your ways about your right everyone else is wrong. I tried helping you out but no that didn't work, have fun breaking shit on the street, jackass
You like attacking moderators?

Not wise at all.
 

·
Premium Member
Joined
·
456 Posts
99blackcivicsi said:
dude, stop w/ the threats i have talked to a few mods on this board (and am close friends w/ one of them) and u sir are an asshole i don't like you, how about this i leave you along you leave me along, deal? if not we can keep this up no problems here

92gsr said:
99blackcivicsi stop being a jerk. you can express your feelings on this board without attacking people and cursing.
Maybe if yo have been on here for a while you would know everything, he has been on my ass since he started on this site.

You have no clue, those mods are my friend too, and you continue to call names + I have nothing against you paranoia.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top