[TrueZen]

Alright, so if you read my other thread in the EG swap board you'd realize that I'm resealing my oilpan right now. I've gotten all the bolts taken out but now I just have to pull the pan off, that Hondabond has it stuck like a SOB. Any ideas on how to get it off?

 

[drhonda]

there are probably dowel pins that are holding it tight. You need to tap it lightly with a rubber hammer and find like a putty knife to slide inbetween to gently pry it apart. It'll take paitence and time. Be carefull.

 

[TrueZen]

Nope, no dowel pins, just a sneaky little bolt that didn't want to be in my field of view.

 

[chad]

Alright, so if you read my other thread in the EG swap board you'd realize that I'm resealing my oilpan right now. I've gotten all the bolts taken out but now I just have to pull the pan off, that Hondabond has it stuck like a SOB. Any ideas on how to get it off?

there are 2dowel pinsin the oilpan!!!!!!!!!!!!!!!!!!!!!!

get the HELMS and you will see wher eyou need to pry onthe oil pan to get it off!!

just did mine....I KNOW FOR FACT THERE ARE DOWEL PINS IN [email protected]!!!