Rev Hard Turbo ??'s

3702 Views 22 Replies 17 Participants Last post by gymkhana99, Jul 10, 2005

AutoWhiz

Discussion Starter · May 13, 2004

Can anyone comment on the differences dyno'd using a Rev hard kit Stage 1 vs the JRSC street?

Also, I went to Rev Hards website and they show application of the stage one for the RSX Type S (which should also work for the JDM Type R I would assume), but do not show the stage 2 kit applicable. Anyone phathom why?

Also, something else interesting..the Stage one uses 440 cc injectors with 7 psi boost, but the Stage 2 uses the factory injectors (I think 310 or 330 cc) and the same boost. SO...how is that possible and get more power from stage 2?

Save

1 - 3 of 23 Posts

bossman032

· #10 · Mar 10, 2005

rev hard kits are pretty good. I have 2002 kit on the EG it works pretty good no problems. make sure you have the correct running I sugguest honda data kpro with a greddy base map at 7psi. I will be getting tuned soon. Hope to make 300+ on pump gas. :up:

people say all the time not alot of them have experience. I daily drive no problems here. :dance:

Save

bossman032

· #16 · May 5, 2005

ty423 said:
today i dynoed and at 7psi I laid down 249whp using 91octane and EMS. 10psi laid down 274whp with 100 octane...at the end 12psi 100 octane laid down 304whp 249tq but was dangerous since the fuel pump was maxed.

Installed Revhard kit at home and have had no problems at all. Runs strong and smooth.

I forgot to mention 2004 EP3 Civic Si

I think with honda data u will put down more power :up:

Save

bossman032

· #20 · May 14, 2005

ty423 said:
you must be a die hard hondata guy. personally i like my EMS.

nahh I haven't tired EMS personally :up:

sorry if that didn't come out right :wow:

would love to try EMS :up:

Save

1 - 3 of 23 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month