Honda / Acura K20a K24a Engine Forum banner
1 - 1 of 1 Posts

· I don't know
Joined
·
2,945 Posts
There is a sequence but you can tighten diagonally to 8lb/ft.


Of course you have to remove all the old liquid gasket with a razor, properly clean the sealing surfaces and use new liquid gasket but not too much. If you use too much liquid gasket when the pan and black sandwich it will squeeze out excess liquid gasket that will clog the oil pickup and starve the motor for oil.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top