Honda / Acura K20a K24a Engine Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
318 Posts
Discussion Starter · #1 ·
So i have the stock dc integra radiator in my car and i have the stock fan set up for it. I really don't want to spend 500 dollars on a radiator and fan. So i was looking at oe replacement radiators. I was wondering with the ep3 and the rsx radiators if i should go with one of them or another integra rad. Do the rsx and ep3 rads just drop in or do i need to move the lower mounts or anything thanks for the help.
 

·
Registered
Joined
·
433 Posts
So i have the stock dc integra radiator in my car and i have the stock fan set up for it. I really don't want to spend 500 dollars on a radiator and fan. So i was looking at oe replacement radiators. I was wondering with the ep3 and the rsx radiators if i should go with one of them or another integra rad. Do the rsx and ep3 rads just drop in or do i need to move the lower mounts or anything thanks for the help.
http://www.octanemotorsports.com/m4...rformance-Aluminum-Radiator/product_info.html

I bought an S2k radiator from them 4 weeks ago for only $208 +35 for shipping (flat rate). They must have figured they were making ANY money on them or got in trouble from Mishimoto for selling them so cheap.

Then spend ~$70 on a universal fan and you will have $350 or so into a really good set up.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top