Honda / Acura K20a K24a Engine Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
Hi all,
I'm building a race car and i have a k20 (DC5) engine fitted.
I have the complete witing harness,clocks,fuse/relay boxs plus
a K-pro ecu. I want to strip down the wiring to the bare minimum,
just enough to run the engine and clocks.
So really i'm looking for a simple wiring diagram i could use.

I have all connected up at the mo and can get the engine to
turn over etc but can't get any spark..


Any help would be greatly appreciated
Keith
 

·
Premium Member
Joined
·
4,294,967,295 Posts
Hi all,
I'm building a race car and i have a k20 (DC5) engine fitted.
I have the complete witing harness,clocks,fuse/relay boxs plus
a K-pro ecu. I want to strip down the wiring to the bare minimum,
just enough to run the engine and clocks.
So really i'm looking for a simple wiring diagram i could use.

I have all connected up at the mo and can get the engine to
turn over etc but can't get any spark..


Any help would be greatly appreciated
Keith
Go off of Hondata's diagram. Just tap for the guages, takes about an hour your first time to get everything right.
 
1 - 3 of 3 Posts
Top