[JOHN]

Ok so I got harness installed. But when I turn the key 2 position 2 which should be the run possition car goes to start which means it will never actuall start cause the started will always be active. Was on the phone with James over there at Hasport went through a couple of possibilities. Switched some pins pulled what should have been the wire that activated the starter still no diffence. They want me to pull the harness ands send it back. I haven't had my car for almost 3 months. Does anyone have wiring diagram so that I can go through the harness? I have to say this totally sucks. Please understand I am in no way bashing Hasport. But at this point the least possible down time would really be great. My wife and I have been car pooling this whole time. If you get what I am saying

 

[nikos]

from hondata's website

http://hondata.com/images/k20awiring.gif

I know the hasport harness is similar that that but not the same.

 

[JOHN]

Hey thanks Nikos. I started this swap before I found your site I just kinda jumped in with both feet didn't really know muck about the swap But that I had a blown D16 (engine blown not my fault faulty oil filter). Any way as far as I know I probably have the only swap in the DFW area provided that I get it done :wink: Keep up the great work

 

[locash]

John,

Although we're not sure exactly what is wrong with the harness you have, we can have it handled and next day air shipped back to you at no cost to yourself. It could be something as simple as a poorly crimped pin, but we would need to see it to diagnose the problem. UPS should be there any day if they aren't already.. We may have enough parts on hand to build you one and have it shipped right out, I'll check tomorrow and give you a call, or call me when you get in..

Thanks..

-joe
Hasport Performance, Inc.

 

[98specR]

John,

Although we're not sure exactly what is wrong with the harness you have, we can have it handled and next day air shipped back to you at no cost to yourself. It could be something as simple as a poorly crimped pin, but we would need to see it to diagnose the problem. UPS should be there any day if they aren't already.. We may have enough parts on hand to build you one and have it shipped right out, I'll check tomorrow and give you a call, or call me when you get in..

Thanks..

-joe
Hasport Performance, Inc.

that's what i'm talking about.

 

[locash]

Unfortunately, I haven't been able to get ahold of John, as he no longer works for the business he used to (the number we have on file). If someone knows how to reach him, please have him call Hasport at 602-470-0065 so that we can get him on the road..

Thank you!

-joe
Hasport Performance, Inc.

 

[98specR]

hey joe
i got those custom axles last week. the ones for a dc2 with 36mm axles nut. that was a pretty fast turnaround.

 

[JOHN]

Unfortunately, I haven't been able to get ahold of John, as he no longer works for the business he used to (the number we have on file). If someone knows how to reach him, please have him call Hasport at 602-470-0065 so that we can get him on the road..

Thank you!

-joe
Hasport Performance, Inc.

JOE yeah my bad didn't think of that But yes UPS did pick up that harness. I do appreciate the your efforts. Yes for those of you who know NISSAN and INFINITI I was with Grubbs Inifniti as there in house tuner/performance parts specialist. Decided it's was time to go solo. I appreciate everything HAsport has done and well what can I say stuff happens. UPS SUCKS


Lets all spread the HASPORT LOVE

Hasport mounts
Hasport temp sensor adaptor
Hasport header
Hasport axles
Hasport PNP harness

 

[98specR]

I appreciate everything HAsport has done and well what can I say stuff happens. UPS SUCKS

yeah i've had problems with UPS in the past also.

 

[JOHN]

Hve to give props :worship: to the guys at Hasport got my harness back on thursday night::dance: installed friday morning 10-15min later I had a running K in my civic . I have sense driven up an down and around the block and to the grocerey store strait out of the header:driving:. I love it!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[NickZED]

Hve to give props :worship: to the guys at Hasport got my harness back on thursday night::dance: installed friday morning 10-15min later I had a running K in my civic . I have sense driven up an down and around the block and to the grocerey store strait out of the header:driving:. I love it!!!!!!!!!!!!!!!!!!!!!!!!!!!

hahaha... thats killer

good customer service hasport! :up:

 

[locash]

John,

Good to hear you receieved the harness back and everything is working well, let us know if we can be of any further assistance!

-joe
Hasport Performance, Inc.

 

[#2]

Hve to give props :worship: to the guys at Hasport got my harness back on thursday night::dance: installed friday morning 10-15min later I had a running K in my civic . I have sense driven up an down and around the block and to the grocerey store strait out of the header:driving:. I love it!!!!!!!!!!!!!!!!!!!!!!!!!!!

:up:

Any idea what the problem was? I just sent mine back to Hasport due to a similar problem.

 

[JDM2ndGen]

:up: :up: to Hasport .. ...and congrats on getting your K swap running ...open header K series = :heart:

 

[JOHN]

:up:

Any idea what the problem was? I just sent mine back to Hasport due to a similar problem.

James told me they had run some wire to incorrect pin locations. He said they had to completely tear down the harness

 

[#2]

James told me they had run some wire to incorrect pin locations. He said they had to completely tear down the harness

Hmmmm, maybe that is what was causing my problem also. Glad to see yours is running. :up:

 

[JOHN]

Hmmmm, maybe that is what was causing my problem also. Glad to see yours is running. :up:

Now I'm having a problem with the O2 sensor keeps setting code I think I may have a short in the harness have to call Hasport On monday to see whats up