Honda / Acura K20a K24a Engine Forum banner
1 - 1 of 1 Posts

·
Resident Journalist
Joined
·
501 Posts
if you tell me what year car you have, which i think you have an EK, i know exactly what the problem is...

i fyou are using a subharness from hasport or hybrid, you have to make sure that you got the right wideband 02 sensor. Check on one of the relays, and make sure the right contacts are getting 12 volts....it should be the signal wire and the acc... wire that gets the 12 volts....they are usually on the opposite side of each other.... i have seen this problem on 4 different swaps all ready and i know how to remedy this... also let me know what ecu you are using too..... k-pro? let me know, i will come back and look for this post and get you running again...
 
1 - 1 of 1 Posts
Top