[#2]

...

 

[nikos]

For a stock EG fuel filter, I used the banjo from earl performance. Give me 20 minutes, I will go dig out the part number

 

[nikos]

Then the banjo bolt I got from http://www.summitracing.com

Earl's Performance Plumbing

EAR-807691ERL Fitting, Hose End, Single Banjo -6 AN to 12mm x 1.25, Swivel Seal, Red/Blue, Ea <---- $19

to order go there

http://store.summitracing.com/defau...&N=100&Ntk=PartSearch&Ntt=EAR-807691&x=15&y=8

here's a picture of it on the stock fuel filter

 

[drhonda]

If you're in a real bind and want to get it runing with the hood on, you could always mount the fuel filter lower. If it was me i would drive around with out a hood until the new one came.. :lol: