Honda / Acura K20a K24a Engine Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
79 Posts
itsrsxxxrated said:
Looking for a Gasket to lower my Compression.

11:5:1 is my compression on my K20A. and Im Boosted. Im running at 6PSI.

I want at least 8 or so, I plan on upgrading the Pulley and Injectors and with my compression low I can get more HP :)

Please HELP!!
sorry by using the 2mm metal gasket you can gain only 2point lower compression as i said from 11.5 to aroung 9.8 or something. My self using a 9:8:1 Piston Lower down to 8:5:1 Compression or you can change to normal rsx piston that only 9:8:1 compression

The metal gasket you can get a new only and go laser cut ....
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top