k24a4 throttlebody?
Join the discussion
Recommended Reading
-
Information on best combination of K24A2 bottom and K20Z4 RSP-2 Head or PRB-1 Head, etc.
All Motor K series Technical DiscussionNewbie to the K platform, I have an S2000 F22C endurance road racing car. Looking to do a K24A2 (2006-2008 TSX) bottom end and K20 Head. Looking for most power and torque with reliability. I have the option to get a K20Z4 RSP-2 head/cams or K20A2 PRB-1 head/cams. Will be replacing rods with...- 0
- 42
-
Stock K24a4 bottom with built head
All Motor K series Technical DiscussionHello Everyone, I have an 02 Rsx type s and have a k24a4 with RBB2 top end. When removing pistons I scratched the interior of the sleeve, so I'm going to get bigger rings or bore out to whatever it needs to be. Can anyone please point me to a thread that has already done this. I've looked far...- 0
- 68
-
!!!!K24z7 BLOCK WITH K20a3 HEAD AND SINGLE LOBE ROCKERS !!!!!
All Motor K series Technical DiscussionWasup peeps I am in a process of building a 2012 k24z7 block with 2004 k20a3 head what head gasket I need to run for this setup.for the head I am planing on runing Intake and exhaust single lobe rockers with type s cams is this possible or not id like to know before I do something wrong any help...- 3
- 2K
-
you449 · updated
-
p2v clearance
All Motor K series Technical DiscussionOkay guys im sooooooo confused. I'm fairly new to the k swap family. I've always been a b series guy. But recently im going through a mid life crisis and want to build something new lol. Been out of the game for 20 years. But from all my research the k swap is the wave of the honda game now and...- 0
- 84
-
kpro running with no vss signal.
All Motor K series Technical DiscussionHi All, I was told by hondata themselves that in cases where a vss signal cannot be sent to the kpro ecu, a constant speed could be selected. However, they also told me that the engine will not work to its full potential as there will be no gear compensation for fuel or ignition. I am running a...- 5
- 135
Join now to ask and comment!