Joined
·
141 Posts
What do you recommend for an aftermarket clutch and flywheel for an k24a4 engine?The car is for top end.
Thanks.
Thanks.
k24a4 Aftermarket Clutch and Flywheel
1 - 3 of 3 Posts
Joined
·
4,294,967,295 Posts
How much power and budget?
Joined
·
141 Posts
I'm just going to run it first with stock internals just the I/H/E.I just want to change the clutch and flywheel.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Looking for rbc intake manifold
General K-series related talkAnyone here ships to the Philippines I'm looking for rbc intake manifold for my k20- 0
- 33
-
TSX head on Accord block
General K-series related talkhave anyone done tsx head with accord block and if anyone did, do you guys have the results or dyno sheets? it will really help me alot for my swap:facepalm: thanks guys and happy holidays- 3
- 640
-
2002 CRV Driveplate Torque Value
General K-series related talkLooking for the torque value for the bolts that hold the driveplate to the crank and the the driveplate to the torque converter. Any help would be appreciated.- 6
- 211
-
Dc5 race car sway bar help
General K-series related talkHi guys I have just purchased a whiteline sway bar kit. The back fitted just fine but the front is away out from the pick up drop link points. It's an 06 dc5. Is there a difference in say an 04 to 06 in the sway bars. See pics Sent from my CLT-L09 using Tapatalk- 4
- 126
-
Not overheating but hose pops off help!! Ac compressor wont turn on either
General K-series related talkHeii guys need some help. My rsx has alot of pressure on coolant that make my upper rad hose pop off. I replaced rediator, thermostat, water pump, colant reservoir, rad cap,upper hose and clamps. I also bypassed the heater core by looping the together. I bleed the syatem too. When i remove the...- 9
- 147
Join now to ask and comment!