[cuban si]

i wasnt sure how to search it and most of what i read dealt with k20a2, and i have a k20z3. anywho...

im about to buy a k24a4 assembly from someone for nearly dirt cheap but first have some ?s from who seems to be an expert...

will it fit when said and done?

if soo...

what parts could i swap over from the k20z3 to the k24a4 to make work?

what other parts would i need to buy?

what modifications would need to be done?

would 9.7:1 work as compared to 11:1 so long as i tuneright away? (i have aem fic)

or can it just swap over with only a head swap?

it seems from most of what i read that these two should work flawlessly with each other, but i just wanted to make sure first. thanx for any assisstance you all decide to offer.

edit: forgot to mention i plan on boosting after some time time

 

[blinx197]

Im sure someone will tell you to search but, you cant just use the a4 pistons. You'll have Valve to Piston Contact. Either CRV (K24a1) or TSX (K24a2) pistons will work. Atleast for OEM Im doin the same build and if your boosting might wanna get a Supertech blockguard but thats just my .02

 

[emancivic]

read this thread:

http://www.8thcivic.com/forums/engine/96928-k24-k20-frankenstien-swap-what-needs-done.html

gl with your build