Honda / Acura K20a K24a Engine Forum banner

K-Tuned Parts Available At CorSport ** Authorized Dealer **

7K views 49 replies 2 participants last post by  nhoncon 
#1 ·


K-Tuned Now Available At CorSport






K-Tuned Now Available At CorSport
Click here to see this product in our catalog and check out the most current pricing.




K-Tuned has created a series of swap packages that contain everything needed to get your K-swap project completed. With 4 packages available, we have done the work for you, laying out all the parts you’ll need to get your swap done right. From essentials, like mounts, axles, headers and conversion wiring to more detailed parts, like the fuel system, pulley kit and throttle cable kits. It’s all available in one place, K-Tuned.





If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
See less See more
6
#14 ·

2002-2005 Honda Civic Si K-Tuned Intake Manifold Gasket





2002-2005 Honda Civic Si K-Tuned Intake Manifold Gasket
Click here to see this product in our catalog and check out the most current pricing.

*

K-Tuned Throttlebody Heatshield Gaskets*

Part # KTG-PRB-MAN (Fits K20A/A2/A3/Z1 PRB Intake Manifolds)

Part # KTG-K24-MAN (Fits K24A2 and K20Z3 Intake Manifolds)

Make a little more power with K-Tuned Intake Manifold and Throttlebody Heatshield Gaskets. Our intake and throttle body heat shield gaskets are manufactured with a high grade temperature insulating plastic. They are precision cut and designed to replace the listed oem gaskets. By insulating the intake and throttle body from the engine heat, it will decrease the intake air temperature, and increase horsepower!*
*

*So I guess you want to know how they work? The cylinder head gets quite hot when your engine is running. The purpose of these gaskets is to break the transfer of heat between the cylinder head and the intake manifold and throttlebody to create lower incoming air temps. As air heats up, it's density drops, reducing oxygen content, robbing you of power because your ecu has to compensate with less fuel. On average, you lose about 1% of density for every 5 degrees farenheit of increased temp!*

Heatsoak is a thing of the past when you get one of these installed on your motor.**

An added bonus is these gaskets are also re-usable. So you won't have to buy expensive oem Honda gaskets whenever you do some work on your car.




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#16 ·

K-Tuned K-Series Fuel Rail & Center Mount Gauge Kit (w/ EFI fittings)





K-Tuned K-Series Fuel Rail & Center Mount Gauge Kit (w/ EFI fittings)
Click here to see this product in our catalog and check out the most current pricing.



KIT INCLUDES MOUNTING BOLTS AND CENTER MOUNT GAUGE.
ALSO INCLUDES EFI FUEL FITTINGS and IDLE AIR ASSIST VALVE DELETE KIT.
PERFECT SETUP FOR FACTORY K-POWERED CARS.


Applications: Direct bolt-on for all factory K-series cars.


The K-Tuned multi-port fuel rail is by far the best looking rail on the market. Using positive customer feedback and the demand to expand our fuel system parts line-up we have added a center mounted gauge to our popular K-series fuel rail. A two piece fitting uses the existing center port on our rail to properly mount the fuel gauge in the center of our rail just below the K-Tuned logo. The resulting look is very clean, compact and is very easy to install. The fitting is soft mounted on the underside of the rail with o-rings, to eliminate the possibility of dangerous fuel leaks caused by the vibration of the engine unlike other rails where the gauge is hard mounted. The fitting and gauge can be purchased separately or you can get the complete setup with a fuel rail for a discounted package price.


Key Features:


Center mounted fuel pressure gauge

CNC machined 6061 billet aluminum

Fully anodized in black or silver

12.5mm (0.50”) bore diameter

8AN inlet/outlet ports

Supports 1000+ whp

Compatible with stock and aftermarket injectors

RACE PROVEN TO 1000+ WHP




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#18 ·

Honda/Acura K20 K-Tuned Billet Oil Dipstick





Honda/Acura K20 K-Tuned Billet Oil Dipstick
Click here to see this product in our catalog and check out the most current pricing.


Applications: Fits all 2002-2013 K-Series engines.

*
The current trend in Honda builds seems to be somewhat focussed on clean details in the engine bay. With that said, we think most K owners would agree that the OEM orange dipstick on the K engine looks completely out of place, especially on a custom valvecover in a super clean engine bay. The JDM black dipstick is a slight improvement, but the height still has some fitment problems on some chassis. After seeing these unfinished looking dipsticks way too often, we decided it was time to offer something on a higher level to our customers.
*

The K-Tuned Billet Oil Dipstick was designed to follow the exact contour of the OEM valvecover, giving it a smooth, shaved *look. Along the bottom of front edge is a small flare, which is just enough for removal. Look closer and you'll notice a small hole located at the center of the flared front edge. This can be used to attach a spring tie down on boosted applications where increased crankcase pressures can blow out the dipstick.
*

Starting with the 6061 billet aluminum top, our signature K logo is engraved after anodizing. All the remaining parts are 100% stainless steel, including the base, wire and level indicator. The base seals properly with 2 o-rings just like OEM and the level indicator has 2 markings on it, again matching OEM. Available for both K20 and K24 engines in 5 colors plus raw aluminum for those who might be interested in polishing or a custom color match.*




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#20 ·

02-06 Acura RSX K-Tuned OEM Shifter Cables and Bushings





02-06 Acura RSX K-Tuned OEM Shifter Cables and Bushings
Click here to see this product in our catalog and check out the most current pricing.



K-Tuned OEM Shifter Cables and Bushings


Shifter cables have been a high demand part in the K-Series community for a few years now. *If you are putting together a K-swapped car and didn’t get the shifter cable set with your engine, you can either try to find them used or get them brand new from a local Honda/Acura dealer. *The problem with the dealership is they can be expensive and occasionally they are on backorder which means there is a wait time to get them in hand. *K-Tuned OEM-Spec / Street Shifter Cables are a strong and cost effective replacement for all OEM 2002-2006 RSX cables. *Fitment and overall length is identical to OEM which makes them compatible with all OEM and K-Tuned shifter boxes, as well as many other aftermarket shifter box options.*
*

These OEM-Spec Shifter Cables are made entirely of high quality materials and they were designed to meet or exceed the OEM units in all areas of construction. *The transmission side of the cables features our 6061 billet aluminum shifter bushings at both connections. *The unique design of these bushings allows for slight flexibility at the joint which is critical for precise shifting. *These bushings improve shift feel and accuracy when compared to the factory rubber bushings. *We also offer our Billet Shifter Cable Bushings separately for anyone that already has OEM cables and may want to upgrade. *Our cable set is sold complete with all hardware for installation. *This includes 4 reusable “hairpin style” cotter pins for all cable end connections, and 3 cable retaining clips. *Note that 1 of the connections uses a self-locking setup on the shifter side. *Our OEM-Spec Shifter Cables are priced right, made to last and work flawlessly. *Race car owners may also want to check out our K-Tuned Race-Spec Shifter Cables, they are the best shifter cables available for your K-Series powered car.


Applications: 2002-2006 RSX (All models), K-swapped EF, EG, EK, DC2




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#21 ·

06-11 Honda Civic Si K-Tuned 4-2-1 Tri-Y Design Header





06-11 Honda Civic Si K-Tuned 4-2-1 Tri-Y Design Header
Click here to see this product in our catalog and check out the most current pricing.



Applications: Direct bolt-on for all 06-11 Civic SI models. Fits both 2-door coupe and 4-door chassis.*
*

Features:

- Fits Civic Si with K20Z3 engine.

- 4-2-1 Tri-Y Design

- 304 Stainless Steel

- CNC cut 3/8" thick SS Flanges

- 2.5" Outlet
*

The K-Tuned 8th Gen Civic SI Header was specifically designed to optimize the performance and power output of the K20Z3 engine that is found in all 2 and 4 door SI models. The header was developed using a proven 4-2-1 Tri-Y design that delivers power gains almost everywhere in the power band, not just the higher rpm range. Additional performance is accomplished by using large diameter piping to speed up the flow of exiting exhaust gases. We also use stepped piping and smooth transitions that minimize restriction. Fitment past the subframe and sway bar is perfect with extra clearance available for engine movement.
*

We start with 44mm primaries that smoothly step into 50mm secondaries and finish with a 64mm or 2.5” exit. Like all our headers, it is assembled using mandrel bent, 304 stainless steel tubing and is fully tig welded. We also use a slightly thicker gauge tubing that allows for better weld penetration and additional strength. The CNC cut 3/8" thick flanges are also double welded and then ported for optimum flow at entry and exit. This header directly replaces the OEM 2 piece design and eliminates the catalytic converter so we included a short 2.5" test-pipe with defouler for the secondary O2 sensor. Please note that we do plan to offer an option for a cat in the future.*



If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#23 ·

Honda/Acura K-Tuned Textured Delrin Shift Knob





Honda/Acura K-Tuned Textured Delrin Shift Knob
Click here to see this product in our catalog and check out the most current pricing.



Applications: All Honda / Acura models and any shifter with a M10 x 1.5 thread.
*

K-Tuned Delrin Shift Knobs feature a tear drop shaped design that feels very comfortable and natural in any drivers hand. The final shape and texture did take some time to get perfect because delrin is a stable and stiff material with a normally low co-efficient of friction. This meant that adding the proper texture to the finished surface was very important in order to increase grip. Our knobs are made on a CNC lathe with a 2 piece aluminum shaft that passes though the entire length to increase overall strength. Available in your choice of black or white with our signature “K” logo engraved in the aluminum on the top. A custom made jam nut is included to keep the knob locked in place. These are a great option to finish off any shifter setup.




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#25 ·

02-06 Acura RSX & Others w/ K Swap K-Tuned Race-Spec Shifter Cables and Trans Bracket





02-06 Acura RSX & Others w/ K Swap K-Tuned Race-Spec Shifter Cables and Trans Bracket
Click here to see this product in our catalog and check out the most current pricing.



K-Tuned Race-Spec Shifter Cables and Trans Bracket

*
To go along with our popular Billet RSX Shifter Box we are pleased to offer our K-Tuned Race-Spec Shifter Cables and Trans Bracket set. This is another part that many of our vendors and customers asked us to make, so here they are. Our cables are a super strong and stretch resistant replacement for the weaker and failure prone oem 02-04 RSX-S cables. The overall length is the same as oem and they are compatible with all oem and K-Tuned Shifter boxes, as well as many other aftermarket shifter box options. Our cables are also more flexible than oem cables and feature the fit and finish that you have come to expect from K-Tuned products.*

*
K-Tuned Race-Spec-Shifter Cables are made almost entirely of stainless steel, including the very important inner cable and all of the exposed cable guides. The outer cable is constructed with a low friction Teflon coated inner liner and a heat resistant polyethylene outer covering. Even the cable mounting ends are made from stainless steel and were designed with a threaded section to eliminate the need for the oem cable clips. However, take note that the oem clips can still be used if desired. Last are the rod end connections, these are fully adjustable and made from 6061 billet aluminum at all four ends. We made one minor adjustment at the gear selector, here we are still using a billet rod end, but we added a spherical Delrin insert to allow proper movement at this joint. Allowing this movement helps reduce possible cable bind during shifting. There is even a bonus, because we have also included our Billet Cable Bracket to make this a complete package. We are so confident in our shifter cable design that we even offer a 1 year replacement and limited lifetime warranty. If you are looking for the best K-series shifter cables available, your search is now over.*
*

Features:

- Perfect accessory for our Billet RSX Shifter Box

- 1 year replacement warranty, limited lifetime warranty

- Stronger and more flexible

- Stainless steel finish looks great and will last

- No need for oem clips with easy to install threaded cable mounting ends

- Includes Billet Shifter Cable Trans Bracket as a package

- Low friction teflon coated inner liner, stainless steel inner cable

- Heat resistant polyethylene outer covering *




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
#26 ·

02-06 Acura RSX K-Tuned Race-Spec Billet Shifter





02-06 Acura RSX K-Tuned Race-Spec Billet Shifter
Click here to see this product in our catalog and check out the most current pricing.




It is no secret that K-Tuned is in close contact with the drivers of some of the fastest import race cars in the world. So when Spoon Sports of Japan asked us for a Billet RSX Shifter to use in an endurance road race car they were working on, we graciously accepted their request. In conjunction with Spoon Sports, feedback from several other racers influenced and accelerated the design of our Race-Spec Billet RSX Shifter that was already on the design table. At a quick glance, the shifter closely resembles the original design with a few changes made to the shift lever and elbow to support the high demands of race cars. *The Race-Spec Shifter uses a simpler fixed elbow position, which is only height adjustable and ideal for circuit racers who really like to use the tallest setting. For drag racers, this design is perfect for heavy shifting in cars with dog box transmissions and straight cut gears. Unlike a stock transmission, most of us know that you can't shift a dog box setup with light hands.

*

The K-Tuned Pro Billet RSX Shifter is a direct replacement for the OEM 2002-2006 RSX-S shifter box and was been designed to work with both factory and aftermarket shifter cables. The full billet design is extremely strong and eliminates all the flex and looseness that are felt with the stock plastic box. The shift lever and pivot ball are made from solid stainless steel and are seated in a spring loaded brass socket. This combination of stainless and brass allows the two materials to lap together while the springs push up and eliminate “play” at the ball. For mounting, there are two different sets of holes on the base, so it can be easily bolted into several stock and K-swap applications. The Race-Spec Billet RSX Shifter was designed for professional hard-core racers and we are pleased to offer them a shifter that is truly "Race Proven".

*

Applications: 2002-2006 RSX, 2001-2005 Civic EM2/ES, K-swapped EF, EG, EK, DC2




If you have any questions you can reply to this thread, send us a pm or use the contact us page on our website.

Thanks for the continued support,
CorSport USA.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top