Honda / Acura K20a K24a Engine Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
414 Posts
There is a thick black/wht wire in a plug,in front of the original auto shifter mechanism.This wire needs to be run into the other black/wht wire on the same plug.This wire is for the starter signal.
 

·
Registered
Joined
·
414 Posts
Try running the starter power wire straight from under dash to the c101 plug...thick blk/wht wire.

I know this is going to sound a little rigged,but you can also try turning the key to the "on" position,and jump a thicker gauge wire from the power terminal at the starter to the signal terminal at the starter.This will "jump start" the starter and will tell you wether or not you have wiring issues still.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top