[JETLAGRACING]

Oil filter setup wonder what the oil filter mount thread is?
Seen it on that Hondata RaceCar and EVO Integra?

First you need a Spin on adaptor, from perma-cool <- they make good stuff.

This is an oil spin on adaptor.

For the k20/k24 oil filter thread size is for spin-on adaptor is M20 x 1.5, thanks to K&N Filters techincal assistance.

Next, for the remote oil filer mount ( picked a certain one for my turbo setup dual pass good for turbo oil feed. )


Filter mount - has a 13/16inch-16 threads K&N filters that have this threads are (By product #) HP-1007, HP-1011M HP-2002, HP-2003, HP-2006, HP-3001, HP-3002, HO-3003 & HP-6002.

Make a good choice on oil coolers Perma cool has some good ones with a cooling fan on it.

Biggest cooler is 21 inch 3/8NPT fittings, just like an intercooler for your oil!

Attach wires to radiator fan.

THE END. More to come!!! :idea:


Hot box: www.Perma-cool.com www.KNFilters.com

 

[JETLAGRACING]

Continued

Oil filter mount.

Oil cooler.

Spin-on adaptor

 

[JETLAGRACING]

 

[JETLAGRACING]

New!

Product # 22-620

Billet aluminum remote spin-on filter mounts are machined from billet aluminum, designed for use in high performance applications. Features include two 1/2" N.P.T. inputs and two 1/2" N.P.T out ports.

In other words its like the 4 pass perma-cool units, but instead of perma-cools cast aluminum unit you can have this supirior billet aluminum.

The same thread pattern also that will fit the following K&N filters :

(By product #) HP-1007, HP-1011M HP-2002, HP-2003, HP-2006, HP-3001, HP-3002, HO-3003 & HP-6002.

http://www.cantonracingproducts.com/adapters/remote_filter.html#cast

 

[JETLAGRACING]

New!

Cantons Billet Oil filter adapter. 90° Rotating Remote Oil Filter Adapters are lighter & smaller but still retain their unique design which permits the two 90 degree 1/2" NPT inlet and outlet ports to be rotated. This simplifies hose and fitting connections for all applications. Ideal when chassis or steering components prohibit the filter from residing in the stock location. Machined from billet aluminum and comes with all necessary hardware and O-Ring seals.

#22-597 20mm thread, 2-5/8" standard seal.

Fits all K-series blocks

http://www.cantonracingproducts.com/adapters/remote_filter.html

If your really hard core take a look at these filters http://www.cmfilters.com/