Honda / Acura K20a K24a Engine Forum banner
1 - 20 of 209 Posts

·
Registered
Joined
·
166 Posts
Discussion Starter · #1 · (Edited)
UPDATED: 21JUL2011

Hello all!
I'm JCrim from TEXAS and a road racing junkie. Been a lurker on this forum for some time now, really great forum might I add. Been a member of many many forums over my life span and I figure it's now time to go ahead and post an intro here so I just don't "come out of nowhere" with a soon to be completed K swaped honda fit. Gonna give Breadman some competition :heart:.

I drive a 2008 honda fit sport. Right now its being caged so I feel like a part of me is missing. My baby has been at Motorsport Enterprises Racing for about 3 weeks now to get this 8 point completed.

Everyone is asking for Pics and Specs. Here we go.

I drive a 2008 Honda Fit Sport. ^_^
-JDM K20A Type R (DC5 Type R)
-Brian Crower Valve Springs & Retainers
-NGK Laser Iridium Spark Plugs
-Hondata Intake Manifold Gasket
-Hasport 07-08 Fit K-Series Engine Mount Bracket Kit
-Hasport K-series Axles Honda Fit
-K-Tuned Idle Air Assist Delete
-Innovative/ Hybrid-Racing Billet Fit 85A Race Mount Kit
-Chasebays Custom Engine and Charge Harness
-Hybrid-Racing 70mm Throttle body
-Custom PRB Intake manifold port matched to 70mm
-Acura RDX 410 Injectors
-Hondata PRB KPro III
-RacePak Data Systems IQ3 RacePak
-RacePak Data Systems IQ3 to Hondata Interface V-Net cable
-EP3 Accelerator Pedal Assy
-EP3 Throttle Cable
-Hybrid Racing Autotensioning AC and power steering removal kit
-Hybrid-Racing Fuel Rail
-Hybrid-Racing (Russell) Fuel Pressure Gauge
-Hybrid-Racing Shifter Box
-Hybrid-Racing Shifter Cables
-Hybrid-Racing Cold Air Intake
-Hybrid Racing Breather Fiters
-Hybrid-Racing returnless fuel line kit
-Hybrid-Racing 1600CFM Electric Slim Fans
-BOSCH wide band O2 Sensor
-K-Tuned Thermostat Housing
-K-Tuned Upper Coolant Neck
-K-Tuned Coolant Hoses
-Password JDM Spark Plug Cover
-ClutchNet Stage 6 Racing E-Z Lock Sprung Hub Clutch Disc
-ClutchNet Stage 2 Pressure Plate
-Hasport Custom K20A to Honda Fit 3" Header
-Texas Chassis Works Custom Header back Burns SS 3" exhaust
-HushPower DBX 3" In/Out Muffler
-Van Meter Fabrications Hybrid-Racing Shifter to Honda Fit Box Assy
-Van Meter Fabrications Honda Fit Drive by cable conversion kit
-Van Meter Fabrications Radiator relocation kit
-Forged Racing Dual Core Aluminum Radiator
-Acura Integra GSR Modified Radiator Hoses
-Completely Gutted
-Removed the ABS system
-Removed every airbag and all airbag sensors and air bag inflation cartridges and all other unnecessary/ unwanted wiring
-949 Racing 6ul wheels, 15 X 8 et+36 rear and 15 X 9 et+36 front
-Nitto NT-01 225/45/15 front, Nitto NT-01 205/50/15 rear
-FastBrakes 2000 Acura Integra Type R all around brake conversion (12" rotors)
-FastBrakes Stailless Steel Brake lines
-Stoptech Slotted and Dimpled Rotors
-CarboTech XP10(front) XP8(rear) brake pads
-J's Racing Super Taikyu Chrome-moly Long Lug Nuts
-ARP Extended Studs
-949 racing Valve Stems (X2 per wheel)
-J's Racing Front and Rear tow hooks
-J's Racing front grill
-Custom Rogue Carbon Crowl Intake Scoop
-F1 Spec Type 3 Carbon Kevlar racing seat
-F1 Spec Type 2 Carbon Kevlar racing seat (for my larger passengers/ instructors)
-Nagisa Seat Rails (driver)
-Wedge Engineering seat bracket (passenger)
-Takata 6 Point Harnesses
-Skunk2 Pro C Coilovers with custom spring rates 12k front 10k rear
-PowerGrid custom Endlinks
-Alignment; Front = Camber -3.0° Toe = 0°
Rear = Camber -1.8° Toe = +0.17°
-Xenon Depot Bi Xenons HIDs 6500k and 3000k fogs
-Headlight Armor GT Racing Yellow Fog light covers
-J's Racing rear racing banner
-Rear wiper and motor delete
-all seat belts are removed and motors
-odyssey pc680 Battery
-Password JDM battery relocation kit
-All sound deadening has been removed from my car with dry ice, numatic chissel, and fire
-Nardi Torino Deep Corn 330mm steering wheel
-MER Custom 8 Point, tig welded cage
-The entire interior has been repainted to OEM Storm Silver Metalic after the cage installation
-Progress anti swap bar
-JDM Honda Access OEM Window Visors
-ALLVIEW Racers Mirror
-Longacre Mirror Bracket
-DIY carbon fiber stereo delete
-Mobil 1 synthetic 5w30
-GM syncromech friction modified tranny fluid
-ATE super blue brake fluid
-ATE super blue clutch fluid
-OEM Honda Coolant
-Red Line WaterWetter
-I/O Port Camera Mount


Now heres some pics. First ones are old and last ones are newest. enjoy




















In road racing HPDE, before you can pass someone, they MUST give you the passing signal. See if you can spot them below. THE FIT IS GO!

Mini Cooper

Corvette C6 Z06

Mustang Shelby GT500

Pantera

Spec Miata

Camaro SS

lamborghini superleggera

Lotus Exige


Here's some older pics from Motor Sport Ranch, Cresson Texas. I was on bronze 16s..





















and heres me being a douche. lol



Its a retired Formula 1 Honda race suit I scooped up ;) I love it.

Just some new updated pics before roll cage gets installed ^_^

























cage the fit! (Latest)











Thanks for viewing! :driving:
 

·
Premium Member
Joined
·
26,613 Posts
Welcome aboard... Nice fit! :up:
 

·
F1 Junky
Joined
·
2,017 Posts
One of the best-looking Fits I've seen :up:
 

·
Registered
Joined
·
166 Posts
Discussion Starter · #13 ·
looks dope on the 949 wheels.


what buckets are those?

yes these are 949's 6uls (15 x 8 et+36). I also have a 2 6ul 15 x 9s coming in for the front to stagger it on the track only. just dd with x 8's all the way around. still deciding on the tires for the track setup.

The seats I have are F1Spec seats. they are pretty much a replica company. I got these seats before F1Spec got their FIA certification. So mine are not FIA but the good news is they weigh 9lbs each. full carbon kevlar construction. they are uber comfy and I've never had a problem with these or the last set I purchased. F1Spec also offers replacement fabric when they get worn so that was a selling factor for me. They were not cheap either, but in comparison to name brand fia cert seats that are also kevlar, they were significant in price difference.
I have the type 2 and type 3 seats. the type 2 is a spoon rep and the type 3 is a recaro spg rep. they have pics on their site of the real deal next to theirs and the replication is unbelievable.
 

·
JDM KING/K20a Supporter
Joined
·
30,238 Posts
Welcome to the site man, nice to have ta here, very nice intro thread, love the Fit, keep it up...
 

·
Registered
Joined
·
1,599 Posts
welcome. nice fit. Honda should use your pictures to advertise how much head room there is in a fit. the mini in front of you looks like a giant's driving!
 

·
K24 USDM EG
Joined
·
26,855 Posts
yes these are 949's 6uls (15 x 8 et+36). I also have a 2 6ul 15 x 9s coming in for the front to stagger it on the track only. just dd with x 8's all the way around. still deciding on the tires for the track setup.

The seats I have are F1Spec seats. they are pretty much a replica company. I got these seats before F1Spec got their FIA certification. So mine are not FIA but the good news is they weigh 9lbs each. full carbon kevlar construction. they are uber comfy and I've never had a problem with these or the last set I purchased. F1Spec also offers replacement fabric when they get worn so that was a selling factor for me. They were not cheap either, but in comparison to name brand fia cert seats that are also kevlar, they were significant in price difference.
I have the type 2 and type 3 seats. the type 2 is a spoon rep and the type 3 is a recaro spg rep. they have pics on their site of the real deal next to theirs and the replication is unbelievable.
Thanks for the info. post up pics of the reverse staggard fitment. :up:
 

·
Premium Member
Joined
·
2,916 Posts
Nice
 
1 - 20 of 209 Posts
Top