[Juantorres09]

Hello boys hey I have a question about the inyectors wire I bought a engine harness from eBay and the inyectors plugs has 3 wires instead of 2 and I need to reping the wires to a dynamic plugs but the dynamic plugs only has 2 pings so I don’t know how to reping this wires to run this inyector please help

 

[Stefanzoh]

Those are for the ignition coils.
I have the same harness and you will have issues with it (I believe if we have the exact same harness).
When the time comes to start the car and you do not have spark/your radiator fan turns on after cranking, then you need to swap pins 7 and 20 at the C101 connector.

 

[Juantorres09]

Those are for the ignition coils.
I have the same harness and you will have issues with it (I believe if we have the exact same harness).
When the time comes to start the car and you do not have spark/your radiator fan turns on after cranking, then you need to swap pins 7 and 20 at the C101 connector.

Did you got it from geartronics on eBay?

 

[Stefanzoh]

Did you got it from geartronics on eBay?

No, from Amazon but they seem to be coming from the same factory. Same yellow tags, solid wire colors, sleeve. Etc. safe to say we have the same harness. Check if C101 #20 loops to connector B6, if it does, you will have problems starting your car and you will need to switch the wires.