[SchueString Racing]

Ok, so I'm looking at the RSX charging harness and the stock eg fuse box with battery terminals. What do I have to do? Can someone post some pics or really detailed instructions on what to do? I have come this far and I'm not ashamed to say that I'm clueless right now. I'd really appreciate it.

Mark

 

[hybrid racing]

 

[SchueString Racing]

You are awesome. Thanks!

 

[jakevaj]

How long will the inline fuse last? Is it better to connect the wire together without the use of an inline fuse? Which cable is the starter cable? Is it the one with a green stripe?

 

[hybrid racing]

The use of the fuse is just for ease of install. Check for continuity between the starter wire and the connector that goes into the fuse box to make sure you have the right wire.

 

[HondaFreak]

So i just picked up my K24A2 today (big thanks to Nikos) and was checking it out looks very nice. So my question is the charge harness that came with the K24 looks identical to the RSX type S charge I saw the other day at the Acura dealership and to the one posted here in the pics. So can you use any K series charge harness for some reason i thought i read somewhere that you needed an RSX. Will this charge harness work.

 

[goldywang]

So i just picked up my K24A2 today (big thanks to Nikos) and was checking it out looks very nice. So my question is the charge harness that came with the K24 looks identical to the RSX type S charge I saw the other day at the Acura dealership and to the one posted here in the pics. So can you use any K series charge harness for some reason i thought i read somewhere that you needed an RSX. Will this charge harness work.

I had this question as well. I know you have to use a rsx wire harness but i dont konw why you would have to use the charging harness as well. Anyone know if and why?

 

[Karcepts]

I had this question as well. I know you have to use a rsx wire harness but i dont konw why you would have to use the charging harness as well. Anyone know if and why?

You don't have to use the rsx charging harness. My swap came w/ a cut charging harness, so I just used the stock one, and had to lengthen a few wires, solder together, and that was it.

 

[HondaFreak]

So the K24A2 Harness will work...

 

[HondaFreak]

Does the inline fuse need to be any certain amp... And is it completely necessary? Can't you just cut out the battery terminal and solder the two ends back together?

 

[crx20si]

1

 

[goldywang]

So the K24A2 Harness will work...

so anyone know this for sure? I'm using an ep3 harness and it doesnt plug into the tsx charging harness. Do you just rewire the plug on the tsx harness to the ep3 harness so it will fit? anyone know??

 

[jakevaj]

Which wire from the charge harness goes to the positive pole on the battery and which one goes to the fuse box? There are two wires one is black and the other is black/light green.