[drhonda]

What you need:

a2/z1 water pump
a2/z1 oil cooler
associated hoses

joint cooler from s2000
part # 11107-pt2-000 ~$5.00

1. Remove plug.


CIMG0639 by cjk_142001, on Flickr

Install s2000 joint cooler as seen below.

2. install a2 or z1 oil cooler and filter.


CIMG0661 by cjk_142001, on Flickr


3. install a2 or z1 water pump


CIMG0660 by cjk_142001, on Flickr


4. Install misc hoses



5. Karcepts ac/ps removal pulley kit :up:


CIMG0659 by cjk_142001, on Flickr


ENJOY!

 

[signalpuke]

Sweet man :up:
add this to the DIY for me, I am browsing on my phone at the moment.

 

[Goodsnacks]

That's great :up: I'm going to be doing this.. Thanks

 

[razasasin]

I'm in the middle of this right now and was wondering wth to do about the oil cooler - the k24a4 has no tap - I've heard of s2000 part but never seen a picture so thanks - i understand it now!

What size allen key do you need to remove the plug? What size socket for the oil cooler center bolt?

DS

 

[allmotora2]

Size 30 for the oil cooler bolt

 

[drhonda]

allen plug is 10mm

 

[Bossman]

I'm assuming that when you say"z1" this would also apply to Z3 parts?

 

[drhonda]

I believe the z3 water pump is different. I'm not sure if all of the z3 parts are compatible. I know a2 and z1 parts will work because they are identical.

 

[Bossman]

I believe the z3 water pump is different. I'm not sure if all of the z3 parts are compatible. I know a2 and z1 parts will work because they are identical.

hmmm,darn.what's the reason for using the A2 water pump on K24's?I'm already going to add the oil cooler to my K24,just wondering if it's worthwhile to switch water pumps and for what reason.

 

[drhonda]

hmmm,darn.what's the reason for using the A2 water pump on K24's?I'm already going to add the oil cooler to my K24,just wondering if it's worthwhile to switch water pumps and for what reason.

you could just do an external cooler, but oem is oem. Only reason I did it. Keeping it clean.

 

[Chef Andre]

Nice write up.

 

[razasasin]

I'm planning on using the z3 oil cooler and water pump - looks like it will bolt right up..

Thanks for the info!

DS

 

[razasasin]

so far so good - what do i torque the cooler joint to?

 

[drhonda]

you'd have to check the manual for the torque spec

 

[razasasin]

I checked the helms for the s2000 but it's not part of the engine lubrication or cooling system diagrams - it's picture but not labeled and there is no mention of "cooler joint" or anything like it...

Best guess? 16 lb/ft? 24?

 

[drhonda]

It comes with red lock tite on it, I just put it in until I felt comfortable with it.

 

[AnointedDC5]

You can also use the prelude cooler joint it attaches to the bigger outer threads for a cleaner install. I have one I am not using if anyone want it, just pay shipping.:up:

 

[drhonda]

Do you have a pic and part # for future reference?

 

[AnointedDC5]

Not at the moment but I will get it and post it up.

 

[Bossman]

Not at the moment but I will get it and post it up.

:up: