Honda / Acura K20a K24a Engine Forum banner

Help me out guys

1145 Views 10 Replies 9 Participants Last post by  jon v
I need help ..... I am putting a k20 from an ep3 in a del sol for a friend .... he has motor and tranny, aem ems, and the hasport mount kit so I installed the mount kit and hung the motor.

the factory exhaust manifold is on top of the rack :down: .

I need to know what header or manifold I am suppose to use

what shifter box and cables to use

throttle cable

axles are k inners and shaft with B outers I believe could that be confirmed??

wiring????? what do I do

fuel delivery this motor as no return??? regulator is in tank on the EP3 ... what do I do exactly

clutch line


I need some guidance .... point me to a site or help me yourself .... this will be greatly appreciated
1 - 1 of 11 Posts

Can I run the SS hose off the clutch valve on the fire wall to the slave? Or do i have to run the line off the end of the hardline?

I'd like to bypass the hardline and make it cleaner.

1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.