[TODA]

Received my Hasport engine mounts, but I feel that maybe some of the mounting bolts are missing, could someone take a picture of their mounting hardware.

Please ASAP

 

[dre2004]

these mounts are for the ek

 

[drhonda]

you have to re-use some of the existing hardware. At least for an ek you do.

 

[TODA]

Dre2004 thx!! But I could have been more specific, the kit is for EG.

It feels like I am missing one bag of hardware for the rear mount.

 

[TODA]

BMUP!!!!!

 

[Karcepts]

Dre2004 thx!! But I could have been more specific, the kit is for EG.

It feels like I am missing one bag of hardware for the rear mount.

Hope this helps...

Rear Bracket Hardware:

Hex Head Cap Screw, M10x1.25, 30mm Lg, Qty. = 2
Hex Head Cap Screw, M10x1.25, 35mm Lg, Qty. = 1
Washer, M10, DIN 125, Qty. = 3

Rear Mount Hardware:

Hex Head Cap Screw, M12x1.25, 80mm Lg, Qty. = 2
Hex Head Cap Screw, M12x1.25, 100mm Lg, Qty. = 1
Washer, M12, DIN 125, Qty. = 5
Nylon-Insert Locknut, M12x1.25, Qty. = 2

 

[#2]

http://www.honda-tech.com/zerothread?id=909780

That's one of Nikos threads about the Hasport EGK mount kit.

 

[TODA]

Received a complete list from Hasport.

EGK Left Hand Bracket
12x1.25x30 Hex x 3
12mm flat washer x 4
1/2" SAE thick washer x 1

EGK Left Hand Mount
12x1.25x70 Hex x 2
10x1.25x50 Hex x 1
12mm flat washer x 4
10mm flat washer x 2
12x1.25 Nylock x 2
10x1.25 Nylock x 1

EGK Right Hand Bracket
10x1.25x150 Hex x 2
10x1.25 Lock nut x 2
10mm flat washer x 4

EGK Right Hand Mount
12x1.25x120 Hex x 1
12mm flat washer x 4
12x1.25 Nylock x 2
12x1.25x40 Hex x 1

EGK Rear Bracket
10x1.25x35 Flange bolt x 1
1/2" x .335" standoff x 1

EGK Rear Mount
12x1.25x100 Hex x 1
12x1.25x80 Hex x 2
12mm flat washer x 5
12x1.25 nylock x 2