YO IM GOING TO JAIL ON JAN 8 NEED THIS GONE PLEASE k20 HELP ME OUT
i got a 91 crx shell for sale wit a lot for parts to go wit it. this was my personal car which i had a gsr turbo in the car is all straight heres what it comes wit
;;;;;;;
the car no longer has those side skrits. the BODY IS ALL STOCK NOW
old school full race ef traction bars(these provide more clearance than any other traction bar ever)
rywire obd-0 to obd-1 jumper harness wired in wit a brand new 4 wire o2 sensor
kyb struts wit tenzo r drop springs. rides very nice
russel stainless steel braided brake lines
brembo drilled and sloted rotors
carbon matalic pads
some poly bushings
a real jdm tunabe hyper medalion exhaust stainless 2.5 inch
engine wiring harness
92-95 civic koyo radiator 2 inch thick
vis carbon fiber hood(has a crack in the front divers side)
billit rear lower control arms
walbro 255 fuel pump
the body of the car is factory honda white and is in great condition. it has the normal 2'' by 1'' rust spots on the rear quarters(which i will fix if i get my asking price). the fenders are painted white wit a spray can. the car also needs a new front bumper because i had to cut to fit the inter cooler unless you plan on stuffing a big one in there. the rear interior of the car has been taken out and i no longer have. it has 91 crx si seats in good conditon besides a tear in the driver seat about 1'' by 2.5''. can be fixed if you can find that fabric. if you haveany questions pm me.
my asking price is 1000 or bo so shoot some offers but dont low ball me these parts alone are worth more than my asking price
----------------------------------
also have
driver and passenger side axles for b swap
half shaft for b swap
place racing race mounts
9 lb chrome moly flywheel( no aluminium junk)
stage 3 xtd clutch wit pressure plate (still almost new maybe 1000 miles)
shift linkage for b swap
s1 jdm cable b16 tranny fresh out of my car. SOLDDDDDDDDDDDDDDD
im askinG 340 for this
i will sell all this complete for 1200 or BEST OFFER
-----------------------------------------------------------
i got a set of toda a spec cams for any b serise vtec motor. they got probaly about 4000-5000 miles on them great shape. they are out and ready to go
ASKING 275
--------------------------------------
got 2 spider images complete guns wit everything(tanks, hopers, ready to use)
1 has a 32 degrees expansion chamber
i also have a smart parts snip barrel and a shortie barrel
also a electronic trigger and extra tank. also have two masks and a box of 500 balls
everything comes in a duffel bag and is ready to be used
im in north jersy asking 200
-----------------------------------------------------------
94 p28 socketed and has a chip wit knock disabled 8500 rev and 5900 vtec. asking 120
99 gsr p72 $60
91 ls pr4 $30
91 dx crx auto matic $20
98 civic single vtec automatic $40
95 civic 5 speed sigle cam p06 $50
also 2 turbo talon ecu's for a 90-94
and 3 non turbo talon ecu"s for a 90-94 2.0 liter best offer
call me 845 344 7610 or pm me
---------------------------------------------------------------------------
complete ac system for A 95 integra. nothing is br0ken and everything is there and works. i took this righjt out off my car and it worked be4 i took it out. this is a complete kit for a car wit no ac so you need nothing.
asking 150
----------------------------------------------------------------------------
got both doors mannual windows. no dents but need paint 50 a side
mandoire green back bumper mint wit bumper support $40
mandorie green hood stock and mint SOLDDDDDDDDDDD
96-98 rad support brand new never installed 70
98 headlights need to be cleaned 25
front bumper support
and a light gray cargo cover25
cash or trades.
---------------------------------------------------------------------------
99 integra gsr rack and pinion wit rear cross member
like the title says. mint no problems at all. it came from a car that i parted out
ill have pics tomorrow
asking 100
-----------------------------------------------------------------------------
99 integra gsr steering column wit ignition and keys
like the title says no problems and have the paper work from the car it came from if neccisary. it is complete wit the switches and all
asking 100.
--------------------------------------------------------------------------------
fully built gsr head f/s or f/t
YO b20 BUY THIS BY TUESDAY FOR 300
i got
97 (i belive) gsr head
skunk 2 dual springs
skunk 2 pro series ti retainers
skunk 2 pro series flat valves
head was ported and also has been port matched to a skunk2 pro series intake mani and a ctr exhaust mani
the head literally only has about 1000-1100 miles on it since all work was done
ok now the problem....... when the timing was set on the motor it was not done correctly and pistons 1 and 4 hit the exhasut side valves. the can was never started just cranked over. it broke 2 of the exhaaust side vavles on number 4 and bent 2 exhaust side in number 1. i took it to a machine shop and they said it would be about 75 dollars to fix the damage and skunk 2 said it would be 96$ and change for 4 new valves so thats a $172 fix. there is over 1900 in just parts and labor. i am willing to take a big hit on this head as i am no longer in need of b series parts.
coming with the head a 2000 gsr valve cover, an obd 1 dizzy, vtec selenoid, and the head is preped for lsv or b20 v
i am looking for offers on the head as of now not setting a price so dont ask. shoot me offers and i will let you know
i got a 91 crx shell for sale wit a lot for parts to go wit it. this was my personal car which i had a gsr turbo in the car is all straight heres what it comes wit
;;;;;;;
the car no longer has those side skrits. the BODY IS ALL STOCK NOW
old school full race ef traction bars(these provide more clearance than any other traction bar ever)
rywire obd-0 to obd-1 jumper harness wired in wit a brand new 4 wire o2 sensor
kyb struts wit tenzo r drop springs. rides very nice
russel stainless steel braided brake lines
brembo drilled and sloted rotors
carbon matalic pads
some poly bushings
a real jdm tunabe hyper medalion exhaust stainless 2.5 inch
engine wiring harness
92-95 civic koyo radiator 2 inch thick
vis carbon fiber hood(has a crack in the front divers side)
billit rear lower control arms
walbro 255 fuel pump
the body of the car is factory honda white and is in great condition. it has the normal 2'' by 1'' rust spots on the rear quarters(which i will fix if i get my asking price). the fenders are painted white wit a spray can. the car also needs a new front bumper because i had to cut to fit the inter cooler unless you plan on stuffing a big one in there. the rear interior of the car has been taken out and i no longer have. it has 91 crx si seats in good conditon besides a tear in the driver seat about 1'' by 2.5''. can be fixed if you can find that fabric. if you haveany questions pm me.
my asking price is 1000 or bo so shoot some offers but dont low ball me these parts alone are worth more than my asking price
----------------------------------
also have
driver and passenger side axles for b swap
half shaft for b swap
place racing race mounts
9 lb chrome moly flywheel( no aluminium junk)
stage 3 xtd clutch wit pressure plate (still almost new maybe 1000 miles)
shift linkage for b swap
s1 jdm cable b16 tranny fresh out of my car. SOLDDDDDDDDDDDDDDD
im askinG 340 for this
i will sell all this complete for 1200 or BEST OFFER
-----------------------------------------------------------
i got a set of toda a spec cams for any b serise vtec motor. they got probaly about 4000-5000 miles on them great shape. they are out and ready to go
ASKING 275
--------------------------------------
got 2 spider images complete guns wit everything(tanks, hopers, ready to use)
1 has a 32 degrees expansion chamber
i also have a smart parts snip barrel and a shortie barrel
also a electronic trigger and extra tank. also have two masks and a box of 500 balls
everything comes in a duffel bag and is ready to be used
im in north jersy asking 200
-----------------------------------------------------------
94 p28 socketed and has a chip wit knock disabled 8500 rev and 5900 vtec. asking 120
99 gsr p72 $60
91 ls pr4 $30
91 dx crx auto matic $20
98 civic single vtec automatic $40
95 civic 5 speed sigle cam p06 $50
also 2 turbo talon ecu's for a 90-94
and 3 non turbo talon ecu"s for a 90-94 2.0 liter best offer
call me 845 344 7610 or pm me
---------------------------------------------------------------------------
complete ac system for A 95 integra. nothing is br0ken and everything is there and works. i took this righjt out off my car and it worked be4 i took it out. this is a complete kit for a car wit no ac so you need nothing.
asking 150
----------------------------------------------------------------------------
got both doors mannual windows. no dents but need paint 50 a side
mandoire green back bumper mint wit bumper support $40
mandorie green hood stock and mint SOLDDDDDDDDDDD
96-98 rad support brand new never installed 70
98 headlights need to be cleaned 25
front bumper support
and a light gray cargo cover25
cash or trades.
---------------------------------------------------------------------------
99 integra gsr rack and pinion wit rear cross member
like the title says. mint no problems at all. it came from a car that i parted out
ill have pics tomorrow
asking 100
-----------------------------------------------------------------------------
99 integra gsr steering column wit ignition and keys
like the title says no problems and have the paper work from the car it came from if neccisary. it is complete wit the switches and all
asking 100.
--------------------------------------------------------------------------------
fully built gsr head f/s or f/t
YO b20 BUY THIS BY TUESDAY FOR 300
i got
97 (i belive) gsr head
skunk 2 dual springs
skunk 2 pro series ti retainers
skunk 2 pro series flat valves
head was ported and also has been port matched to a skunk2 pro series intake mani and a ctr exhaust mani
the head literally only has about 1000-1100 miles on it since all work was done
ok now the problem....... when the timing was set on the motor it was not done correctly and pistons 1 and 4 hit the exhasut side valves. the can was never started just cranked over. it broke 2 of the exhaaust side vavles on number 4 and bent 2 exhaust side in number 1. i took it to a machine shop and they said it would be about 75 dollars to fix the damage and skunk 2 said it would be 96$ and change for 4 new valves so thats a $172 fix. there is over 1900 in just parts and labor. i am willing to take a big hit on this head as i am no longer in need of b series parts.
coming with the head a 2000 gsr valve cover, an obd 1 dizzy, vtec selenoid, and the head is preped for lsv or b20 v
i am looking for offers on the head as of now not setting a price so dont ask. shoot me offers and i will let you know
