Flywheel Difference
1 - 5 of 5 Posts
Joined
·
6,415 Posts
It will fit fine. :up:
Joined
·
469 Posts
TSX flywheels and K20a2 have different Pressure plate bolt pattern/spacing. If you using a a2 clutch with a2 flywheel your fine.
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
2002 CRV Driveplate Torque Value
General K-series related talkLooking for the torque value for the bolts that hold the driveplate to the crank and the the driveplate to the torque converter. Any help would be appreciated.- 5
- 171
-
Dc5 race car sway bar help
General K-series related talkHi guys I have just purchased a whiteline sway bar kit. The back fitted just fine but the front is away out from the pick up drop link points. It's an 06 dc5. Is there a difference in say an 04 to 06 in the sway bars. See pics Sent from my CLT-L09 using Tapatalk- 4
- 77
-
Not overheating but hose pops off help!! Ac compressor wont turn on either
General K-series related talkHeii guys need some help. My rsx has alot of pressure on coolant that make my upper rad hose pop off. I replaced rediator, thermostat, water pump, colant reservoir, rad cap,upper hose and clamps. I also bypassed the heater core by looping the together. I bleed the syatem too. When i remove the...- 9
- 79
-
TSX head on Accord block
General K-series related talkhave anyone done tsx head with accord block and if anyone did, do you guys have the results or dyno sheets? it will really help me alot for my swap:facepalm: thanks guys and happy holidays- 2
- 577
-
03-05 Accord K24a2 swap
General K-series related talkI am picking up an 03 Accord 5 speed this week with a bad engine. A yard locally is selling an 06 K24a2 with matching 6 speed ecu for $650. (not sure if the harness is included or available and uncut). Can I drop this in and run it on the stock ecu with the TSX harness? Id rather buy an a2 then...- 1
- 1K
Join now to ask and comment!