[A2gt35r]

What's the best tool to take off the crank pully ( off the shelf)? I used two chain tools and had to file the teeth and don't want to do that again. any info thanks.

 

[allmtrallday]

crank pulley puller.

 

[rsxmachine]

something like this, with two 1/2" drive breaker bars and a cheater bar for leverage
http://www.amazon.com/exec/obidos/t.../ref=sr_1_1/102-2919101-0216942?v=glance&s=hi

I'm not familiar with the Alltrade brand but most others cost like $40-50.

 

[A2gt35r]

something like this, with two 1/2" drive breaker bars and a cheater bar for leverage
http://www.amazon.com/exec/obidos/t.../ref=sr_1_1/102-2919101-0216942?v=glance&s=hi

I'm not familiar with the Alltrade brand but most others cost like $40-50.

Thanks that was a great help, and allmtrallday thanks for nothing!

 

[rsxmachine]

forgot to mention you may need the help of a super-strong friend. a shop-rated 1/2" drive impact wrench did nothing on this bolt.

 

[A2gt35r]

I took this off twice before but used 2 chain tools and a 19mm and a breaker bar with a pipe at the end! No air tool is as strong as a human!

 

[tryfe]

something like this, with two 1/2" drive breaker bars and a cheater bar for leverage
http://www.amazon.com/exec/obidos/t.../ref=sr_1_1/102-2919101-0216942?v=glance&s=hi

I'm not familiar with the Alltrade brand but most others cost like $40-50.

I just bought one of these off there next day delivery a couple hours ago. I gotta get this dam bolt off before I can pull the head and resume my install.

 

[A2gt35r]

I just used this tool the other day and it worked great with 2 1/2'' breaker bars, which are stronger than air tools seeing how you usually only use 90psi on a gun. Thanks again rsxmachine!

 

[suprfast]

how exactly does that work?

 

[tryfe]

You attach a breaker bar to the crank pulley holder tool and there's a hole right through the hex to allow you to reach the bolt in the middle that you'll use another breaker bar on to jar it loose.

 

[A2gt35r]

On an engine stand I was able to do this by myself. Probally wasn't a good idea since I have a hernia and now I had top get a support which looks like a screwed up version of a jock strap :wow: .

 

[tryfe]

On an engine stand I was able to do this by myself. Probally wasn't a good idea since I have a hernia and now I had top get a support which looks like a screwed up version of a jock strap :wow: .

lmao!

 

[luke]

haha

 

[suprfast]

oh cool...would have explained itself if they showed it on the crank bolt. thanks for the heads up