[The Dza]

Clutch Install

Hey I've tried searching for a clutch how-to on here but no luck. Would you all recomend replacing the clutch on my trans when i get it or keep it stock. Im not going to buy a trans for more than 1500 which i have found to have anywhere from 3000mi to 70000 mi. I plan on using an ACT street clutch

thanks ahead of time
Dan.

 

[The Dza]

Re: Clutch Install

anyone
???

 

[JDM96SpecCTR]

the clutch is on ur motor not the trans....but if u are changing the tranny and the clutch is a stock used one that u have then u might as well kill 2 birds with 1 stone

 

[The Dza]

the clutch is on ur motor not the trans....but if u are changing the tranny and the clutch is a stock used one that u have then u might as well kill 2 birds with 1 stone

im buying a k24a2 and im ordering the type s trans at different times. Okay thanks i feel dumb now man i have a lot to learn

 

[k-series]

I'm guessing you know how to remove the trans already, if not, look here.

There are about 8 or so 10mm 12pt bolts that have to be removed to get the old clutch off of the motor and another 6 or so 17mm 12pts for the flywheel.

Your new kit should come with an alignment tool for the pressure plate and clutch and you just bolt it all back up.

Good luck.


Steve

 

[The Dza]

hey man thanks for the link its a great article. I cant wait until i have a day where i dont have so much homework to read it seriously