Honda / Acura K20a K24a Engine Forum banner

1 - 20 of 89 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I'm about to start a k24/k20 build and its going in to a 99 ek coupe all black. I want a very nice weekend car that is a sleeper! I was going to go turbo but like i said i really want it low key, so i wanted a goal of 400 whp n/a. i know 300+ is a walk in the park for a k series. but i would love to have a 400 whp n/a. another question would be how street driveable would it be?

any input would be greatly helpful, what parts and so on

for now the block is resleeved with AEBS-T
 

·
Registered
Joined
·
422 Posts
It is possible
- if you have a monstrous budget
- if you want it to be a track car only
- your best bet is built k24/20 with a rotrex supercharger
 

·
Registered
Joined
·
2,531 Posts
A 400whp NA engined car will be far from a sleeper, at idle there will be no mistakeing that something way beyond normal is under the hood. It will also be not very drivable around town.
 

·
Pepsi Soprano
Joined
·
1,365 Posts
25,000 can buy you a lot of things but 400 N/a on a ''sleeper" aint
One of them .

I'd say maybe a half a million could get you that.
I say that because you are goin to have to buy 20 of those motors to run for a year or so

Go back to sleep and dream about the day you wake up from that dream.
 

·
Banned
Joined
·
1,180 Posts
Ok MAYBE this will get it BUT understand EVEN IF this works it probably wont last a month AND it WILL NOT BE STREET FRIENDLT AT ALL!!!!!!!!!!!!!!!!!!!!!!!! SHIT WILL SOUND LIKE A V8 WITH BIG CAMS!! Anyway:

K24A1 Block
Sleeved to 89-90mm
BC 2.6L Stroker Kit
16-17:1 cr Pistons
Probably a different set of STRONGER Rods other than that with the kit

K20A2 Head
PORTED to 370-400cfm's
BIGGEST DAMN Custom Cams u can make!
AFI/IPS Intake Manifold
90mm T.B w/4'' Intake
750cc Injectors
BEST Valvetrain Available! Including Ferrera Rockers
CUSTOM RACE HEADER!!!
3.5'' Exhaust

EP3 Tranny(5 speed)
Custom Gears(just call Mfactory and have them build u one! the works)
DSS/Gator Stage 4+axels

K-PRO
AND THE BEST TUNER U CAN FIND IN THE COUNTRY

revving to 11,000rpm
C16 Race Fuel

This MAY get u the 400 n/a if not then close to it but again. NOT VERY DRIVABLE ON THE STREET AND PROBABLY WONT LAST THAT LONG! DEFINETLY A DRAG ONLY CAR!!!
 

·
Registered
Joined
·
986 Posts
Ok MAYBE this will get it BUT understand EVEN IF this works it probably wont last a month AND it WILL NOT BE STREET FRIENDLT AT ALL!!!!!!!!!!!!!!!!!!!!!!!! SHIT WILL SOUND LIKE A V8 WITH BIG CAMS!! Anyway:

K24A1 Block
Sleeved to 89-90mm
BC 2.6L Stroker Kit
16-17:1 cr Pistons
Probably a different set of STRONGER Rods other than that with the kit

K20A2 Head
PORTED to 370-400cfm's
BIGGEST DAMN Custom Cams u can make!
AFI/IPS Intake Manifold
90mm T.B w/4'' Intake
750cc Injectors
BEST Valvetrain Available! Including Ferrera Rockers
CUSTOM RACE HEADER!!!
3.5'' Exhaust

EP3 Tranny(5 speed)
Custom Gears(just call Mfactory and have them build u one! the works)
DSS/Gator Stage 4+axels

K-PRO
AND THE BEST TUNER U CAN FIND IN THE COUNTRY

revving to 11,000rpm
C16 Race Fuel

This MAY get u the 400 n/a if not then close to it but again. NOT VERY DRIVABLE ON THE STREET AND PROBABLY WONT LAST THAT LONG! DEFINETLY A DRAG ONLY CAR!!!

Thats a very basic setup, that combo won't make 400. You have to put your mind to it if you really want to make 400 whp.
 

·
Pepsi Soprano
Joined
·
1,365 Posts
Ok MAYBE this will get it BUT understand EVEN IF this works it probably wont last a month AND it WILL NOT BE STREET FRIENDLT AT ALL!!!!!!!!!!!!!!!!!!!!!!!! SHIT WILL SOUND LIKE A V8 WITH BIG CAMS!! Anyway:

K24A1 Block
Sleeved to 89-90mm
BC 2.6L Stroker Kit
16-17:1 cr Pistons
Probably a different set of STRONGER Rods other than that with the kit


K20A2 Head
PORTED to 370-400cfm's
BIGGEST DAMN Custom Cams u can make!
AFI/IPS Intake Manifold
90mm T.B w/4'' Intake
750cc Injectors
BEST Valvetrain Available! Including Ferrera Rockers
CUSTOM RACE HEADER!!!
3.5'' Exhaust

EP3 Tranny(5 speed)
Custom Gears(just call Mfactory and have them build u one! the works)
DSS/Gator Stage 4+axels

K-PRO
AND THE BEST TUNER U CAN FIND IN THE COUNTRY

revving to 11,000rpm
C16 Race Fuel

This MAY get u the 400 n/a if not then close to it but again. NOT VERY DRIVABLE ON THE STREET AND PROBABLY WONT LAST THAT LONG! DEFINETLY A DRAG ONLY CAR!!!
Haha that's the 400 hp recipe.
Go call Norris,[email protected] cartel ,jeff @go-power,Bisimoto,InlinePro,Blueprint and ask them to sell you that list you have there and guarantee 400whp .
Come back and report to me.
 

·
Registered
Joined
·
395 Posts
Just buy my set up...:wink:
 

·
Banned
Joined
·
1,180 Posts
Haha that's the 400 hp recipe.
Go call Norris,[email protected] cartel ,jeff @go-power,Bisimoto,InlinePro,Blueprint and ask them to sell you that list you have there and guarantee 400whp .
Come back and report to me.
Well i said maybe and thats NOT A BASIC SETUP! I know [email protected] Call him and give him that list and ask him what i left out. What, go bigger on the head and if possible on the block mm wise? HE said N/A! Not nitrous etc. So other than going bigger on the head and if possible bigger mm on the block what else in my list did i miss??????

I said Biggest CUSTOM CAMS! CUSTOM HEADER, CUSTOM THIS AND CUSTOM THAT! Shit give a list of ur own and lets see the difference. Bet u wont make 400whp N/A on shelf parts! EVERYTHING HAS TO BE CUSTOM!

BTW, u can go bigger on the crank than the 2.6L kit also.
 

·
Banned
Joined
·
1,180 Posts
Thats a very basic setup, that combo won't make 400. You have to put your mind to it if you really want to make 400 whp.
Give ur list/recommendation and lets see the difference!
 

·
Pepsi Soprano
Joined
·
1,365 Posts
lol I bet rookie didn't know that one can go bigger than the 2.6L kit crank. :dude:
Whachu talking bout Willis.
That kid up there is a Masta Chef.
Even custom parts sit on a shelf.
 
1 - 20 of 89 Posts
Top