[Rudsxone]

My first K swap and it was a fun journey through out it all, the car is sold now btw I have commitment issues

 

[Rudsxone]

Before I found this taffeta I had bought a crashed fg2 for 2k
I did not know basically only the stripped long block and trans would be useful with a vss adapter

but comes with rbc manifold and short geared lsd trans. This donor had relatively low miles

Swap out and siting next to this vsm that I bought for $1000 but was Hondamatic and in very bad shape overall….sold when I found The taffeta on FB market place.

 

[Rudsxone]

Anyways I began buying the parts…used ekk2’s in great shape, hybrid complete tucked fuel system, Hondata kpro v4, EG subframe etc

Used this belt to delete the acfit and ran fine

Swap is in, using base 32mm axles fitting perfectly with the forks flipped

 

[Rudsxone]

Welcome to K20a.org @Rudsxone .

Oh sorry to read it was sold. What do you mean by "commitment issues"? Did you commit to something here?

Thanks for sharing your pictures. BTW, your avatar shows the Eau Rouge bend, correct?

don’t be sorry I took the big offer and ran, working on a k24 EG now but more on that later.

yessir that’s the infamous Spa francorchamps

 

[Rudsxone]

Ordered a PLM 4-2-1 header that looked great and fit perfectly

Went to JCCS 2021 and stopped at Art Of Attack for some parts and they sold me this hybrid shifter for a great deal

decided to run the fg2 donor car full size radiator since I already had + Arizona summer in mind

switched to ktuned 70mm tb and ran some hybrid z3 hoses

No point in the 70mm TB if the manifold is not matching so decided to try my hand…errr I mean drill at porting

 

[Rudsxone]

Fast forward here 😆. Very nice fit in of that engine. I like that. You mean you took the OEM axles?

yeah I think rsx base model axels is what i was running

 

[Rudsxone]

Running a base model 2002 RSX harness with a few mods and swapped plugs and flipped TPS wiring

some base model rsx charge harness Mexican hacks lol left modified to fit EK bay fuse box right is stock oem

Huge thanks to Chris @ Hasport, solid since forever. Picked up a conv harness, Kpro v4 in a PND and new hasport mount hardware

learn’t myself how to set up a basemap for the z3 by watching all the YouTube vids I could, thanks to those that upload that info :thumbs up:

I believe the best butt dyno running map was the k20a2 stock tuned basemap

 

[Rudsxone]

Stretched the cable that catches all the “lower gears” so bad I only had 1st 3rd and 5th lol that was fun driving around 🤦🏽‍♂️

Ordered an eBay 3” n1 style full exhaust and had it welded up sans cat to avoid it being stolen 👀

testing different basemaps driving around

the set up how it sold running great

was fun learning how to do K swaps