Honda / Acura K20a K24a Engine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 56 Results
  1. General K-series related talk
    Sorry if this is constantly posted but just curious on a couple things and wanna get some confirmations. First of all does the k24a2 TSX head really just slap on my k24a1? And I do need a type S oil pump as well? And if anyone has some reputable places to buy these parts that would be awesome...
  2. 1992+ Civic EG / DC2 / EK K-Series Swap
    So I've got a k24a out of a 2008 Acura TSX type S swapped into a 1999 Civic. I'm currently using a kpro v4 that I bought new myself, a Rywire engine harness, and a hybrid racing conversion harness. Currently the car turns over no problem but does not start. I have +12 and ground on my coil packs...
  3. All other models (mr2, mini etc)
    I picked up my JDM K24A2 yesterday and have started to disassemble the original K24A4 from my element. This will be slow going but I will update as I go. My plan is to replace the exhaust, engine, most of the suspension, brakes, and intake and run the system with Ktuner. Stage two will be...
  4. Wiring and Electronics
    So probably a dumb question... Will the dash harness of an automatic plug into the chassis harness of a manual TSX? I need a chassis harness and a dash harness for my project. I have two options. 1) Dash harness and Chassis harness from automatic TSX. 2) Dash harness from automatic TSX, Chassis...
  5. General K-series related talk
    I bought a JDM K24a from JDM Depot and it was titled “04-08 Acura TSX 2.4L DOHC 4CYL I-VTEC High Comp RBB-2 Engine JDM K24A 5524728” I took off the valve cover to find I have 3 lobes on both cams which leads me to believe I have either 04-05 TSX or 06-08 TSX but I’m not entirely sure about this...
  6. Introduction Forum
    Hello everyone! I am currently building a 1970 Karmann Ghia with a K swap from my 2007 Acura TSX. I am already learning a lot about the K24a2 in the Acura and want to learn more. I will be using everything out of the Acura including harness, body modules, etc. Afterwards, I want to set it up...
  7. Introduction Forum
    Hello, my name is Josué Mainly will be making post asking questions about for my current engine build for now.
  8. All other models (mr2, mini etc)
    Hey please understand that I have no idea what I am doing (literally). Yes as the name suggest BuiltBlind 1. cause I have no idea what I'm doing 2. I'm actually nearly blind. I am attempting to swap a k24a2 stock motor into a 03 protege 5 and need as mulch advice as possible (I am mechanically...
  9. All Motor K series Technical Discussion
    Hello all, I'm looking to machine and upgrade my rbb3 head. I'm close to pulling the trigger on Prayoonto cam stage 4. I'm also making the common selection to get Supertech spring/retainer/seat kit SPRK-H1021D. I'm also picking up the +1mm valve Supertech HIVN-1022F & HEVN1021F. Just want to...
  10. Honda Fit / Prelude / Accord K-series Swap
    Hello Members, I'm working on my TSX swap and have a TSX transmission. This is going on a 2003 Honda Accord. For the shift wires, the Accord 5 speed MT has a pin hole for washers and a cotter pin. See below: However, the TSX 6 speed MT does NOT have a pin hole for the cotter pin. See below...
  11. Honda Fit / Prelude / Accord K-series Swap
    Howdy Members! I have a 2003 Honda Accord EX (K24A4). Currently working on swapping a K24A (JDM) into the Accord. It's an easy drop-in. However, besides me needing to add wiring for reverse gear lockout since I'm going to use the TSX transmission, not sure about the EGR situation. On the...
  12. General K-series related talk
    I’m looking for some parts and dont know where I could order everything all at one time Im looking for Rsx type-s Oil pump All parts that will be needed for this conversation All Gaskets for k24a2 Looking for gasket kits that come with everything I will need from the top of the head down to...
  13. Introduction Forum
    Hi, Does the TSX and RSX use the same lower control arm bushings?
  14. Parts Wanted
    hi im currently looking for a manual trans for my 04 tsx, or a parts trans with a good case, mine just blew a hole in the front half of the case. im looking for a trans asap will cover shipping to portland oregon.
  15. ECU and Tuning
    hello team, I have an 05 tsx, 6spd MT with k tuner. I was really hoping someone here could help me get a tune to get my car running. im willing to pay the price. ive recently paid a website called e-tunerz $249. 2 weeks ago and ive received nothing I have reached out to local sources and...
  16. Parts for sale
    Sold, please close.
  17. ECU and Tuning
    I have a K24a2 that I've just finished installing into my 2003 AP1 S2000 and I'm using the AEM series 2 30-6030 ecu in conjunction with a custom engine wiring harness from Rywire. I'm having issues connecting to the ECU (not getting power or grounding?) and I'm hoping someone here can help me...
  18. 1992+ Civic EG / DC2 / EK K-Series Swap
    1992 Honda Civic SI EG Engine K-Swapped EG 2004 K24A2 (TSX) 6 Speed Transmission K-Pro ECU K-Tuned 4-2-1 Headers 3" strait pipe Hasport motor mounts karcepts fuel rail and lines walbro fuel pump Stock RBB intake manifold New lower control arms New rack and pinion New inner and outer tie rods...
  19. Parts for sale
    New Price - RRC Intake Mani, Cover, Bolts, CL7 Intake Tube| TSX HyTech Cat + Catback I originally purchased the full system from IntegraGSR23 earlier this year. Selling because I cannot get the maximum gain out of it because I do not have sufficient supporting mods (cams and valve train...
  20. Parts Wanted
    Looking to purchase an upper intake manifold for 04-05 Acura TSX. Please let me know how much for part plus shipping to Uniondale NY 11553. Thanks
1-20 of 56 Results
Top