Honda / Acura K20a K24a Engine Forum banner

skunk2

  1. Skunk 2 ultra race intake manifold silver k series BNIB

    1992+ Civic EG / DC2 / EK K-Series Swap
    Bnib skunk 2 ultra race intake manifold silver for k series asking $1000 located in Brampton Ontario Canada
  2. Skunk2 Alpha header + K-Tuned 3 inch Oval Exhaust?

    Acura RSX / TSX / Honda Civic EP3 / 2006 Civic Si
    Has anyone ever installed a Skunk2 Alpha header and K-Tuned 3" oval exhaust on the K20A3? I have a JRSC EP3, Comptech Icebox, RC440 injectors, stock header, and Greddy SP2 catback. I'm looking to get a larger exhaust and the K-Tuned oval is the best sounding, looking, and fitting it looks. The...
  3. looking for rbc 72mm throttle body

    Parts Wanted
    need 72mm thorttle body for rbc manifold, blox or skunk2 doesn't matter. if you got one in decent shape and reasonable price text me at 412-478-4417 thanks
  4. Skunk2 Pro-C Coilovers

    Parts for sale
    Selling my Skunk2 Pro-C coilover suspension package. P/N 541-05-6740. These were installed middle of last year. The kit comes with front struts, rear shocks, three wrenches for adjustment/installation and a set of brand new Skunk2 Tierod ends. I will ship but keep in mind it's probably going to...
  5. k24a2 FS tons of aftermarkets/k swap parts

    Parts for sale
    jkkkk
  6. Skunk2 Composite Fuel Rail

    Engine Building
    been looking around at fuel rails, just wondering if anyone has used Skunk2's composite fuel rail and what did you think of it? I understand it is supposed to keep fuel cooler, but I haven't seen it on any setups I've read. How does it compare to hybrid racing, ktuned, or other rails? Thanks for...
  7. k24/k20 frank build

    Engine Building
    hey guys i'm in the process of building a k24a4 block with k20a2 head frank build, this will be all motor street car( daily driver) any help or advise will be appreciated. here's what i'm planning on doing/set up. BLOCK: k24a4 - overbore to 88mm(.040+) -supertech 88mm 12.5.1cr pistons -scat...
  8. Hybrid Racing / AEM / RC / Skunk2

    Parts for sale
    BNIB Hybrid Racing Shifter Cable Bushing $65 Shipped BNIB Skunk2 Pro-Series Exhaust Cam Gear (P/N: 304-05-0275) $200 Shipped BNIB Skunk2 Pro-Series Valves **Stock Size** (P/N: 310-05-2535) $275 Shipped BNIB R-Developments K-Series Engine Bolt Kit $70 Shipped 130 Pieces: Chain case cover /...
  9. Another Skunk2 chain slap thread

    All Motor K series Technical Discussion
    so some of you may remember my thread last week about not being able to get the motor to time, well finally we got it timed but now on to my next problem :facepalm: from what it sounds like my go power dual valve springs are binding on each other.. like the two springs rub on each other as i...
  10. S2 70mm TB VS HR 76-70mm TB (Venturi)

    Engine Building
    I can get a good deal on a Skunk2 70mm throttle body but ive been looking at the the venturi type throttle body from Hybrid racing as well. The inlet is 76mm and tapers down to 70mm. My set up will be a k20aR with stage 2 cams and RRC modified for 70mm. I know that some japanese tuners like...
  11. Poor Skunk2 Quality can ruin your engine

    All Motor K series Technical Discussion
    Bought a new Skunk2 Inlet manifold for my K-engine (no fake!). Sadly Skunk2 had no quality-check before delivery, so the inlet manifold was leaking at the flange to the thermostat housing -> missing cooling liquid -> steam bubbles in the blocke -> head gasket failure etc. Skunk2 cancelled my...
  12. FS:BRAND NEW skunk2 72mm DBW THROTTLE BODY FOR 06+ Si *SoCAL*

    Parts for sale
    GOT A skunk2 72mm BORE BLACK PRO SERIES DRIVE-BY-WIRE THROTTLE BODDY FOR 2006+ CIVIC Si. IT'S BRAND NEW, NEVER INSTALLED, AND IN THE BOX. ALL PARTS ARE IN ORIGINAL PACKAGING AND SEALED. I BOUGHT IT WITH SOME BIG PLANS FOR MY CAR BUT I HAVE OTHER PRIORITIES NOW SKUNK2 IS 72mm INNER AND 80mm...
  13. RSX-S NA build underway... What should I expect?

    All Motor K series Technical Discussion
    Alright guys, little background real quick, I just recently bought an 03 rsx-s not too long ago, this will be my first kseries, it has a Brian Crower 2.35 stroker, eagle rods, and 12.5:1 comp ratio CP pistons (stock bore) and manley rings. No head upgrades, nothing, in fact the owner said the...
  14. RRC or Skunk2 Pro Series IM?

    Engine Building
    Hey k20A users. i just wanted to know all your opinons on the two. which is worth the bang for the buck. and overall which is best when it comes to numbers. Thanks sorry i'm still new to the whole tuning thing :silly:
  15. K20A2 cylinder head, Skunk2 cams, more...

    Parts for sale
    Selling all the stuff I was getting together for my em2 k24/k20 build, including a type-s cylinder head with a nearly-fresh port and polish. Up for Sale: - K20A2 Cylinder head, recent port and polish, new valve seals, OEM valves, Skunk2 Stage 2 Camshafts, Skunk2 titanium retainers...
  16. Nyce1sTV - Skunk2 Racing Visits NY/NJ July 14th, 2010 Day 1 Pt.1!!

    Drag Racing
    The owner of Skunk2 Dave HSU and DR. Charles Madrid of Skunk2 Racing recently visited the NY/NJ area for a couple days! Check it out as they hung out with the Nyce1s.com crew and stopped in at a few shops during their stay. Here is part 1 of the video feature...
  17. Stock VS Skunk2 vs Hybrid Racing? Tensioners

    General K-series related talk
    http://cms.skunk2.com/id/533/Need-We-Say-More/ check the video out!
  18. Skunk2 vs RRC intake Manifold

    General K-series related talk
    Hi, I want to upgrade my RBC intake manifold. Porting is pricey and I rather just get a better intake manifold and sell my RBC. The options that I seen that are better then the RBC is the Skunk2 and RRC. I seen dyno where the RRC outperforms but on the other side Skunk2 just posted up dyno...
  19. cams failure

    All Motor K series Technical Discussion
    We had two sets of cams: stage 2 and pro cams. Mileage for stage 2 - 4000 miles, pro cams - 300 miles. The oil pressure was fine and fully sinthetic oil is used. The result you can see in the pics. Really crapy and cheap material. Stage 2: Pro-cams:
  20. skunk2 intake manifold, tial 50mm, sparco sprintV, blox drags

    Parts for sale
    hey have a couple of things forsale id love to trade for s2000 parts or general turbo parts such as i need an aem ems for an s2000, injectors, wastegates, turbo (no baby dicks) intercooler or whatever you know what i mean. i have a brand new condition skunk2 intake manifold that will fit any...
Top