Honda / Acura K20a K24a Engine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 91 Results
  1. ECU and Tuning
    Hi, I am adapting an EMU Black ECU to a JDM-K20A in a Honda Elise Mk1. I am wondering what the IACV duty cycle during cranking is on a stock ECU. Any help is welcome! Christian
  2. ECU and Tuning
    Hi, I am in the process to adapt a ECUMASTER EMU Black to a K20A. I am using a KManager v4.5.8 calibration (K20A-itr) and other sources for reference. I know this topic might be a bit geeky. I am running the engine in a Lotus Elise and use it for street/trackday driving. I am striving for the...
  3. Introduction Forum
    Hi, I have a JDM-spec K20A swapped in a Lotus Elise Mk1 in 2009 here in Germany by Komo-Tec. The engine is stock with changes that come with the swap. It has different headers for the application, a cat and a Janspeed exhaust. I used the OEM ECU for a long time and then had – in hindsight -...
  4. General K-series related talk
    I am planning to swap the engine in my Honda Accord VII CL7 to the K20A FD2. In the plans I have a short intake, throttle with cruise control from DC5 67mm, suction shaft K24Z3, exhaust shaft K24A3/K20A FD2. I plan to use the AST5 box. Is this gearbox really gonna kill my performance? This car...
  5. General K-series related talk
    I was told this is a JDM k20 motor swapped into this car I just purchased but after looking into it further I don’t know if it is. Only markings I see are “ppa-5” “hf” “04 7 a” and this is what the motor looks like What motor is this??? Thanks!
  6. 8th generation Civics 2006+
    Hello all, I am doing a swap on the above car as the valves are all bent and no compression at all. I know the exhaust header is different and the oil dip stick but other than that what else should I be concerned with when putting this engine in. I have done an R18 to R18 but never a JDM K20a...
  7. General K-series related talk
    Hi! First post and I'm looking for some advice/suggestions! Currently looking to replace the AC parts in my 2006 Honda Accord Euro R K20A ABA-CL7, are there any experts out there that can confirm or point me in the right direction for North American parts equivalent to my current Hodna...
  8. Forced Induction and Nitrous K series discussion
    I am looking for a compact turbo mani that'll fit my k20 es1 sedan, preferably v-band, and not flow like those dog butt ebay cast manifolds. I'm going for about 350-400 whp with a flat power band on stock internals as a daily driver and wanna keep it compact to control the heat better and retain...
  9. General K-series related talk
    I have an EP3 with a K20A Engine swapped in. The problem I have is that the previous owner used a different ecu and its causing massive problems. I'm not sure what ECU it is but I just want a replacement so I can drive my car. EP3 Type R ecus are close to 1000 dollars but the 6 Speed Type S is...
  10. General K-series related talk
    Recently grabbed what was described as a “jdm k20a” from a coworker for $250 as he doesnt know how many miles are on it. Its my first K series and first engine. I want to build it as practice as my first project and see if I can drop it in my 97 LX and get any fun out of it. But I want to know...
  11. 1992+ Civic EG / DC2 / EK K-Series Swap
    I have a 98 ek k 20a2 swap worh ekk2 mounts and eg subframe 32mm hubs passanger side basemodel axle to small it stretches and after a while it comes off of the halfshaft anyone else have this problem and what axle solved this problem is there and longer axles I can buy ?
  12. 2001+ Civic EP3 / RSX DC5 / EM2
    I have an 03 RSX Type S and I plan on swapping a K20A into it to but i'm concerned with whether I absolutely need to get the motor from the DC5-R or if I could put the CL7-R motor in. Only reason i'd rather get the CL7 K20A motor is because it is siginificantly cheaper than the DC5's K20A. What...
  13. General K-series related talk
    I’m doing a k20a swap into a ek for my first time was wondering what were the parts I need. I know you need eg LCA and shock forks. What else do I need what tie rods would I need any specific bushing, hard ware ?
  14. General K-series related talk
    Hi i am from MYS and i decided to ask something.........why does some FN2R comes originally in K20A? Can anyone tell me?
  15. 1992+ Civic EG / DC2 / EK K-Series Swap
    I know there is probably the info out there somewhere but I’m new to forums and it seems easier to ask my specific questions rather than research through several different forums. so, I have a CL7 Euro R JDM K20A and want to use this engine & box for my EK4 hatch. initially I wanted to use DC5...
  16. 2001+ Civic EP3 / RSX DC5 / EM2
    hey guys after owning my ep3 for 10years only been on track hardly ever street driven ive added 30/76 turbo and vtec lock pins also run aem series 2 plug and play buddy club n+ cams 1000cc injectors e85 my problem now it seems to only fire cylinder 1 and 4 2 and 3 dont make a sound...
  17. General K-series related talk
    Hi, I got a K20A with Kpro installed in a Lotus. Evap is not hosed up but was still active untill the solenoid started making a horrible noise. So I turned it off in Kpro. But I would like to remove the solenoid completely but when I pull the plug I get an error code. Is there anyway to turn...
  18. General K-series related talk
    Hi guys, need some opinion here. I'm doing a full restoration on my civic EG. It has a K20A turbo in it currently. Several parts need to be replaced. Now I am debating between sticking with K20A or get a K24 block (k-frank)? Either option, i need to get new pistons. I calculated...
  19. Cars for Sale
    SOLD I’m testing the waters on my 1998 Acura Integra. It is a California bureau of automotive repair certified legal K20a2 powered integra. That’s right, this car is 100% legal. The odometer reads 192k but the motor has about 150k. The engine was pulled from a 2003 acura RSX type-S. It has the...
  20. Cars for Sale
    12000 obo Up for sale is my 1998 Acura Integra. It is a California bureau of automotive repair certified legal K20a2 powered integra. That’s right, this car is 100% legal. The odometer reads 192k but the motor has about 150k. The engine was pulled from a 2003 acura RSX type-S. It has the...
1-20 of 91 Results
Top