Honda / Acura K20a K24a Engine Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 19 Results
  1. K-Series Transmission
    Hello everyone, New to the K series platform, very well versed with the B series but don’t have much experience with the K. I’m planning for a K20 swap in my CRX, and I was wondering what I could do to improve the EP3 5 speed I have laying around. My friend has a K20Z3 transmission that had...
  2. 1992+ Civic EG / DC2 / EK K-Series Swap
    Hi guys I have a few questions regarding putting a k24a4 with the transmission from a accord into a 97 ek hatch. First off the mounts, I have been reading a lot and I know the ekk3 mounts are supposed to work with the stock subframe and the 03-07 accord manual transmission just wondering if...
  3. 1992+ Civic EG / DC2 / EK K-Series Swap
    I keep seeing people on forums saying you can use base rsx axles without swapping inner joints. I know what your going to say, just bear with me. Can you use 2 driver side ep3 axles and just swap the joint on one of them? assuming I have 3 oem axles to work with? Would the extra length on the...
  4. All Motor K series Technical Discussion
    Did a k24 swap in my mr2 and was downloading the base map a on first start up didn’t have fuel pressure and after some digging ended up just running 12v from the battery into the back of my fuel pump relay just so I could prime it but ever since I did that when I turn the key k manager is saying...
  5. 1992+ Civic EG / DC2 / EK K-Series Swap
    Hey y'all. First of all, let me introduce myself. You can call me Forrest and i'm new here, so be gentle. I own an FN2 TypeR and an EK hatch i'm K swapping. For my K swap, I bought a K24A3 from a Honda Accord CL9. I've been doing some work to the engine like cleaning it, changing the timing...
  6. 2001+ Civic EP3 / RSX DC5 / EM2
    I've been having problems with my k swap for 2 months now. Started off with swapping immobiliser and using a k tuned conversion harness, it would start and run but dies when you give it throttle. Moved on to swapping out the whole dash harness and the engine bay harness to rule out any wiring...
  7. 2001+ Civic EP3 / RSX DC5 / EM2
    Having a serious issue getting my k swap running. Went over everything looked at so many forums and videos. The issue I'm having is it takes a lot of cranking but eventually starts rpm jumps to 3,000 drops to 500 rpm runs rough then stalls even if I apply any throttle it causes it to stall. I've...
  8. Cars for Sale
    Looking for a clean k swapped car or shell, or even a daily d or b series in good shape I can swap down the road just interested in anything clean really to get started got the itch again. Located in Phoenix AZ message me for my number if you want to send me info about what you got or any...
  9. All Motor K series Technical Discussion
    hi all, i've just ordered a JDM K24a from Hmotors. should be here within a couple weeks. I've also ordered all the pre-install motor prep parts from Kmiata. things like the custom oil pan and type s oil pump etc. David @kmiata recommended drag cartel 2.2s and or 3.2 cams. My goal is track...
  10. General K-series related talk
    i know this might sound weird but i have a 1993 eg and the fuse box under the hood as been deleted my question is how do i hook up the starter and alt power do i tie them tougher and hook them to the battery or what ? seen form on how to hook them up but there all to the fuse box under the hood
  11. 1992+ Civic EG / DC2 / EK K-Series Swap
    1999 Honda Civic DX: The car has been completely rebuilt using only the best parts available at the time of the build which started in 2007. The car was a project of mine while I was in college and has since served its purpose. I currently work in the city and just really don’t have the time...
  12. General K-series related talk
    Just as my title states, I need to know whether or not they will be compatible, ie all the ports match, no blockage of flow, etc... I have been searching online but found nothing. I don't have any head gaskets from each so that I could compare... I have both the a4 and a8 heads but the a4 is...
  13. All Motor K series Technical Discussion
    Whats up K20 Fam! i recently took my car to get dyno (em2 k20a2 kpro) and the tech came out and said vtec was not engaging so they check oil pressure & vtec signal and all as good. so they decided to pull cams to check pins to make sure the bc cams where installed right...everything so far...
  14. Pictures Gallery
    Hi, This is our humble little K swapped ec8. i believe it's the first ec8 in the UK to under-go this swap. Basic spec: -k20a2 head -k24a3 block -k24 oil pump -Dc5 jdm camshafts -DC Sports header -custom 3" system with stealthy muffler -budget air intake (for now) -RC enginering 550cc...
  15. Parts for sale
    UP FOR SALE ARE A COUPLE OF K PARTS AND A COUPLE OF EK PARTS MOST PARTS ARE A LIL NEG. SO DONT BE AFRAID TO ASK THE WORST THAT CAN HAPPEN IS ILL SAY NO LOL IM LOCATED IN QUEENS NY IF PICK UP IS A POSSIBILITY GREAT I AM WILLING TO MEET UP OR DELIVER IF YOU PAY FOR GAS AND IF ITS NOT TOO...
  16. Cars for Sale
    Hey everyone.. im looking for a clean car to have some fun with... I would like to get either a 92-00 coupe,96-99 hatch or 94-00 teg with a k in it.. im really looking for a stock k20a or a2 but maybe a k24 or a k20z . just let me know what you have.. I would really like a coupe or teg more...
  17. Parts for sale
    Scotty T PM me for contact or email Harrisonburg, VA HYBRID PARTS have been SOLD! RSX Type S Pass. Side Engine Mount - $30 shipped
  18. K-Series Transmission
    6 speed gears in a 5 speed bell housing? I'm somewhat of a neebi to the site. I did a search but could not find any info related to my question. I will appreciate any info that is offered. I'm researching a future project. A Fit with a k24 swap and 6 speed 4 wheel drive transmission. :driving...
1-18 of 19 Results
Top