Honda / Acura K20a K24a Engine Forum banner
harness
1-20 of 26 Results
  1. 1992+ Civic EG / DC2 / EK K-Series Swap
    The only thing i have right now is the long block (k24a8) with A4 TB. If i go with a 5 speed accord trans, which engine harness and ecu will i need? If i go with an ep3 trans, which harness and ecu will i need? PLEASE HELP I've been researching for months on my kswap now and keep going back and...
  2. All other models (mr2, mini etc)
    Hey y'all, planning on getting my frank parts and I'm wondering how difficult fitting an RSX harness to a CRV is going to be? Like is there any specific things I need to know, like if i'm gonna have to fab some wires, etc.
  3. General K-series related talk
    So I plan of buying a k series tucked harness and a haltech elite 1500 but will I have to run a fuse box or a switchboard. I’m just not sure how the stock harness works. Also they have an option on the k tuned website to add a dedicated power cable. Any advice would be appreciated. Hope everyone...
  4. Wiring and Electronics
    When dropping the stock K24A4 back into the 2003 Accord, I noticed a few issues with the wiring. Looks like at some point I broke some of the harness clips off for some of the sensors or stripped them out completely (when removing the engine or dropping back in). I'm looking for some assistance...
  5. 1992+ Civic EG / DC2 / EK K-Series Swap
    Hey guys, I have a 99' EJ6 sedan and I'm looking to k-swap it. I have some questions in regards to this swap. Goals for car: Budget K-swap street/showcar If I use a K24A4 motor with a K20A2 6 speed trans, what harness/ecu would i have to buy? Any sensors id need to swap/buy? Or If I get a JDM...
  6. Introduction Forum
    Hi all Noob in here I would like to start K20/K24 project My car is honda CRV 2013 with k24z9 engine code and automatic transmission. I'm willing to swap the head by using PRB head. Hopefully all master in this forum can help me out to finish the project. Or if someone is already starting...
  7. Wiring and Electronics
    HELLO FORUM MY NAME IS CHRIS IM NEW TO THE K SERIES SCENE CURRENTLY DOING A K24A2 BLOCK WITH A K20Z3 HEAD I WAS TOLD THAT THE EP3 HARNESS WOULD BE ABLE TO RUN MY SWAP IVE ALSO BEEN TOLD THAT THE EP3 AND RSX BASE SHARE ALOT OF SIMILARITIES SUCH AS AXLES SO MY QUESTION IS COULD RUN MY SWAP WITH A...
  8. 1992+ Civic EG / DC2 / EK K-Series Swap
    I attempted to search for an answer in the forums but did not find an answer so im hoping one of you can help me out. It would be much appreciated. I bought k20a3 with 5 speed trans at first to swap into my 93 del sol i accumulated parts that was shown required in a end all thread for kswap...
  9. Parts Wanted
    Hola! I'm new on here, but need some stuff for my K24A4 swap into my MR2. As the title states I need that specific year/model charge & engine harnesses as I recently picked up an 02-04 RSX-S PRB ECU with KPro V4 and I'd like to keep the harness modification to a minimum. Thanks in advance...
  10. Wiring and Electronics
    Hey guys so I'm getting close to completing my ariel atom build, and the largest hurdle coming up is electrical. I have the complete wiring harness from the engine side including ecu and under hood fuse/relay box. I however do not have the underdash fuse/relay box. I was wondering if this is...
  11. 1988-1991 EF Civic / CRX K-Series Swap
    Hey there guys, I was looking at some pictures of the hybrid racing harness, there is a plug on there that I don't have on my harness to plug up to. My CRX is a late production 1990 HF which is actually a 1991 HF. The plug is circled in red in the picture. Any info on it would help! Thanks...
  12. Parts for sale
    whats up k20. today im doing some cleaning for the new year. some parts for sale or trade for Turbo parts,hybrid racing shifter box, or K swap parts for DC integra. (1) a used set{less than 1000k miles}HONDA Civic EK K-Series Level 2.9 Axles (EKK1 mounts only) mint condition sold to B.out_ek9...
  13. Parts for sale
    parting out a rsx i was building. i have plenty of vouches. everything is located in Ohio. means of contact is pm, email [email protected], and text 513-319-8358 rotora big brake kit. custom painted. comes with ss braided lines, and almost new pads, and the 13"...
  14. Parts for sale
    All prices are OBO. All prices include the cost of shipping and Paypal fees. 32110-RBB-A503 2004-2007 K24A2 TSX Engine Harness $SOLD 100% Mint uncut still has salvage yard tags. K24A2 TSX Injectors $60 K20A2 RSX-S Injectors modded by Nikos $SOLD K24A2 TSX MAP Sensor $25 K24A2 TSX coils...
  15. Parts for sale
    Bought a core motor about a year ago and took some parts off it now I'm selling the motor on k20a.org and these parts--(check out my other thread if interested in the engine it tells the full story behind the engine and how I acquired it) ALL parts are 150% legit nothing stolen I am not a thief...
  16. Parts for sale
    Bought a core motor about a year ago and took some parts off it now I'm selling the motor on k20a.org and these parts--(check out my other thread if interested in the engine it tells the full story behind the engine and how I acquired it) ALL parts are 150% legit nothing stolen I am not a thief...
  17. Parts for sale
    for sale are 2 Takata gel pads. my car got broken into and they stole my seats and belts and left these that were under the drivers seat. I bought crow harnesses so no need for em. they might not look as fresh as day one out of the box but they are in perfect condition. asking 60 shipped...
  18. Parts Wanted
    I started building my engine harness and need the reverse switch plug with some or as much wire as possible.
  19. Parts for sale
    Pratically brand new harness. I'll post pics up tonight.
1-20 of 26 Results
Top