RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum
Reply
 
Thread Tools
Old 03-31-2010, 06:26 PM   #1
GT35RK20
K20a.org Basic User
 
GT35RK20's Avatar
 
Join Date: Mar 2007
Location: Greenville, SC
Posts: 302
Default RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

K-Series Motors are very popular here at TDC. Nhia brought us his RSX-S with high hopes of making more power out of his K20 N/A build. K-motors can be very responsive when coupled with top notch parts, and Nhia wanted to do it right when it came to the bolt-on's, cams and springs.




We installed all the parts listed below:
1.) RDX 410cc fuel injectors
2.) IPS K2 Iron Core cams
3.) Supertech dual valvespring, steel retainers, seats, and seals
4.) Skunk2 Racing 3" Muffler with 3" KTeller Exhaust Piping
5.) Hybrid Racing Timing Chain Tensioner


His Modifications already on the RSX:
1.) Injen cold air intake
2.) RBC intake manifold with Karcept adapter and Hondata intake manifold gasket
3.) Kiddracing Krusher header
4.) Hondata K-PRO
5.) Tuned by Hubert (that's me) @ TDCAuto.com





The head all set up and ready to go.



Hybrid Racing Timing Chain Tensioner Installed and ready to go.



Skunk 2 Muffler all set up and welded together along with the rest of the exhaust.




Nhia's car went on the dyno and after a few pulls, this is what we were able to efficiently extract of this setup with roughly 140k miles:



__________________
Heads Up Motorsports (Upstate, SC)
One stop tuning for: S300, K-Pro, Flashpro, Crome Gold, PowerFC, Nistune, Utec, Cobb, SCT, HP Tuners, C.A.T.S, AEM EMS, AEM F/IC, Motec, Haltech, SAFC, VAFC, NEO, AEM F/IC
GT35RK20 is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 03-31-2010, 06:30 PM   #2
02k20a2
New Member
 
02k20a2's Avatar
 
Join Date: Apr 2007
Location: chicago
Posts: 76
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

whats a stock type s dynos at on your dyno?
02k20a2 is offline   Reply With Quote Quick reply to this message
Old 03-31-2010, 09:14 PM   #3
15Secsohcvtec
K20a.org Basic User
 
15Secsohcvtec's Avatar
 
Join Date: Sep 2005
Posts: 119
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

No Offense But Isnt That STOCK TYPE S HP#s..

Friend of mine dyno'd his stock k20a hytech rep header with rbc stock tb..Made 232 STOCK MOTOR.

227 Seems LOW AS SHIT...was the valve adjustment done correctly maybe?
15Secsohcvtec is offline   Reply With Quote Quick reply to this message
 
Old 04-01-2010, 03:18 AM   #4
GT35RK20
K20a.org Basic User
 
GT35RK20's Avatar
 
Join Date: Mar 2007
Location: Greenville, SC
Posts: 302
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

For comparison purposes, RSX-S with stock cams and bolt ons (excluding rbc) generally put down between 180-191whp on our dyno.


Here's a more recent thread.
https://www.k20a.org/forum/showthread.php?t=74249

And another one for comparison purposes on our dyno.
https://www.k20a.org/forum/showthread.php?t=67836
__________________
Heads Up Motorsports (Upstate, SC)
One stop tuning for: S300, K-Pro, Flashpro, Crome Gold, PowerFC, Nistune, Utec, Cobb, SCT, HP Tuners, C.A.T.S, AEM EMS, AEM F/IC, Motec, Haltech, SAFC, VAFC, NEO, AEM F/IC
GT35RK20 is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 03:41 AM   #5
Blazed
K20a.org Master User
 
Blazed's Avatar
 
Join Date: Dec 2005
Posts: 39,473
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Quote:
Originally Posted by 15Secsohcvtec View Post
No Offense But Isnt That STOCK TYPE S HP#s..

Friend of mine dyno'd his stock k20a hytech rep header with rbc stock tb..Made 232 STOCK MOTOR.

227 Seems LOW AS SHIT...was the valve adjustment done correctly maybe?
No offense but u have no idea what u r talking about. Same swap will NOT put out same numbers in different chassis' and all dynos do NOT read the same. Try reading the stickies at the top of all the forums and look through the dyno comparison threads.

Also, this is not b20 so let's watch the SHIT talk.

Thanks for sharing GT35.
Blazed is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 03:50 AM   #6
hyperev
K20a.org Basic User
 
hyperev's Avatar
 
Join Date: Feb 2005
Posts: 107
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

good numbers for a simple set up
__________________
EG Ferio K20a - 240whp/161tq
K24/K20 - 274whp/206tq
H3autoworks Manila, Philippines
hyperev is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:04 AM   #7
import_yaj_guy
K20a.org Basic User
 
import_yaj_guy's Avatar
 
Join Date: Aug 2009
Location: N.C.
Posts: 118
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Thanks again Hubert for an awesome tune. Can anybody recommend me some parts that would increase my numbers? Looking for at least 240hp. Already have a SKunk2 70mm TB in mind. Change the oil, oil had 3000+ miles on it already and sat for a week before got tuned. Upgrade to Comp Clutch Stage 4, my stage 1 slips when shifting 1st into 2nd gear at WOT. Any help would be greatly appreciated, thanks.
import_yaj_guy is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:17 AM   #8
GT35RK20
K20a.org Basic User
 
GT35RK20's Avatar
 
Join Date: Mar 2007
Location: Greenville, SC
Posts: 302
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

No problem Nhia.



FYI, I sold my stage 5 yesterday.
__________________
Heads Up Motorsports (Upstate, SC)
One stop tuning for: S300, K-Pro, Flashpro, Crome Gold, PowerFC, Nistune, Utec, Cobb, SCT, HP Tuners, C.A.T.S, AEM EMS, AEM F/IC, Motec, Haltech, SAFC, VAFC, NEO, AEM F/IC
GT35RK20 is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:26 AM   #9
signalpuke
K20a.org Master User
 
signalpuke's Avatar
 
Join Date: Jul 2005
Posts: 4,294,967,295
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Quote:
Originally Posted by import_yaj_guy View Post
Thanks again Hubert for an awesome tune. Can anybody recommend me some parts that would increase my numbers? Looking for at least 240hp. Already have a SKunk2 70mm TB in mind. Change the oil, oil had 3000+ miles on it already and sat for a week before got tuned. Upgrade to Comp Clutch Stage 4, my stage 1 slips when shifting 1st into 2nd gear at WOT. Any help would be greatly appreciated, thanks.
MkIII's, higher compression, and a custom header will get you 240hp no prob.
__________________
[SIGPIC][/SIGPIC]
New to the K-Series? ☆★☆★ DIY and FAQ ★☆★☆ <------- CLICK THE LINK!
Otatsiihtaissiiststakio piksi makamo ta psswia
signalpuke is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:30 AM   #10
signalpuke
K20a.org Master User
 
signalpuke's Avatar
 
Join Date: Jul 2005
Posts: 4,294,967,295
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Nice numbers by the way
__________________
[SIGPIC][/SIGPIC]
New to the K-Series? ☆★☆★ DIY and FAQ ★☆★☆ <------- CLICK THE LINK!
Otatsiihtaissiiststakio piksi makamo ta psswia
signalpuke is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:37 AM   #11
02ep3si
K20a.org Master User
 
Join Date: Aug 2005
Location: Cincinnati
Posts: 2,431
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

k24 bottom.. I made 253 with a k24 bottom and similar mods.
__________________
My Youtube

02 954rr
00 EBP EM1 (winter beater)
02ep3si is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 04:39 AM   #12
NitrousG35
K20a.org Basic User
 
NitrousG35's Avatar
 
Join Date: Dec 2009
Location: Minisnowta
Posts: 132
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Thanks Hubert for posting this. My IPS cams and Supertech vavletrain along with ID injectors will be installed next Thursday. Just looking at the pictures should keep me going until the install and dyno runs are completed. BTW, the Mustang dyno where I have had my car tuned previously has only showed 165hp for a base Civic Si. Like the member whose car was worked on, I too am already looking at other ways to improve power. I am probably going to go with a Go-Power ported RBC intake manifold and a Hybrid 70mm DBW TB when that is released.
NitrousG35 is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 06:13 AM   #13
mikedillard07
K20a.org Advanced User
 
mikedillard07's Avatar
 
Join Date: Feb 2010
Location: Tampa, FL
Posts: 709
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

not bad numbers....is your bottom end built or just stock? im doin a k20a3 killer cam and im lookin to get atleast 260-280 all motor but im also gonna be running 12.5:1 comp. and than hopefully make over 300 with a 125 shot direct port ..
mikedillard07 is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 11:22 AM   #14
hwsurnk
K20a.org Basic User
 
Join Date: Mar 2009
Location: Virginia
Posts: 317
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

I am just curious but what was in injector duty cycle at with the RDX injectors?
__________________
840+ whp STOCK BLOCK K20a2 Prayoonto Racing Stage 2 All-motor cams
TREBLIC TUNED FTW
[email protected] 2550lbs (getting there 1 hit at a time)
hwsurnk is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 11:44 AM   #15
allmotora2
K20a.org Master User
 
Join Date: Nov 2007
Location: plano,tx
Posts: 1,338
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Try e85
__________________
ppl i sold to: 2004ep3hatch, RDix, yanper, cali 18, KON, rsxmatt1985, k20eg41689, negrok20r, NABeastRR, The Sword, JASON363672, bigmoeman786, Ktwamper, topscrew, d-rock, Walezy, Beejis60, BuiltRSX, NHswaps13203, 6spd_EK, HonkeyDong, bchaney, Nolan, jracer72, supa_vi, mike_paz, KdiZzL3, Stockcrx, K20R EG6, cardinalredeg, amc1976, JCRasta, Goodsnacks, k20turboEP3, Mixwell, fallenraven2k22, eh3z1, BluePrint Racing, JDMRacer731, Everlasting1832, nick99civicsi, ronaldve, Dan_EF8, jim9, eK_Civic, Honduh, swhangin
allmotora2 is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 12:01 PM   #16
Mr_Plenty
K20a.org Master User
 
Mr_Plenty's Avatar
 
Join Date: Jan 2007
Location: Rock City, V.I.
Posts: 1,486
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Nice instead of people comparing dyno numbers it would be better to wait for track times. It's obvious this dyno reads a bit low as he stated tuned rsx-s make about what a stock rsx-s would make on any other dynojet.
The curve is nice and smooth IPS ftw!
__________________
VOUCHES: HNAperformance, civic5133, onefstek, civicmotorhead-1320WhtRex-#2, allmotora2, pb16b, tuner04civic, Stockcrx, BuiltRsx, 3k1n,*HAZARD*club
Mr_Plenty is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 02:07 PM   #17
import_yaj_guy
K20a.org Basic User
 
import_yaj_guy's Avatar
 
Join Date: Aug 2009
Location: N.C.
Posts: 118
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

im running on a stock block right now. a k24 block would be nice but i dont want to dump a load of money into that right now. this is my daily driver and im planning to keep the k20 motor all the way. i did wanted to do e85 but there's no gas station that carries it within 50 miles from where i live, sucks.
import_yaj_guy is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 02:14 PM   #18
15Secsohcvtec
K20a.org Basic User
 
15Secsohcvtec's Avatar
 
Join Date: Sep 2005
Posts: 119
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Quote:
Originally Posted by Blazed View Post
No offense but u have no idea what u r talking about. Same swap will NOT put out same numbers in different chassis' and all dynos do NOT read the same. Try reading the stickies at the top of all the forums and look through the dyno comparison threads.

Also, this is not b20 so let's watch the SHIT talk.

Thanks for sharing GT35.
Well obviously if I don't know IM ASKING A QUESTION AS I STATEMENT.
And regardless if its b20 or k20 or any other site....Understand the difference between shit talk and a broading question/statement in the attempt to UNDERSTAND what I clearly was confused about.

Thank You.
15Secsohcvtec is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 02:35 PM   #19
drtye
Lifetime Member
 
drtye's Avatar
 
Join Date: Sep 2006
Location: PA
Posts: 10,281
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Quote:
Originally Posted by Blazed View Post
No offense but u have no idea what u r talking about. Same swap will NOT put out same numbers in different chassis' and all dynos do NOT read the same. Try reading the stickies at the top of all the forums and look through the dyno comparison threads.

Also, this is not b20 so let's watch the SHIT talk.

Thanks for sharing GT35.
exatly. at least somebody knows a dyno is just a tool to see what a motor likes/dislikes


would love to see a baseline (stock motor) layed over that map.
drtye is offline   Reply With Quote Quick reply to this message
Old 04-01-2010, 03:48 PM   #20
charisma
New Member
 
Join Date: Sep 2009
Posts: 34
Default Re: RSX-S: IPS K2 / Supertech Valves / Bolt-ons + Dyno Tune

Awesome! I can't wait for the day people learn HP lies, traps do not!".
__________________
Absolute Pro-Formance- Built & Tuned
charisma is offline   Reply With Quote Quick reply to this message
Reply

Bookmarks

Tags
ips, ips k2's

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in


Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump



All times are GMT -8. The time now is 10:36 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
 

Garage Plus vBulletin Plugins by Drive Thru Online, Inc.