//FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! - Page 7 - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

**crazyjetsfan22** · 03-15-2012, 11:48 AM

Interior looks great! I need to paint my interior soon!
What are you doing about the seat belts?

TheKhemist · 03-15-2012, 12:11 PM

What did you use for the plastics to get them black? Looks good!

Reggie@MWDesign · 03-16-2012, 02:03 AM

Quote:

Originally Posted by crazyjetsfan22

Interior looks great! I need to paint my interior soon!
What are you doing about the seat belts?

Quote:

Originally Posted by TheKhemist

What did you use for the plastics to get them black? Looks good!

I only painted the plastic pieces,

The headliner and the sun visors were both professionally wrapped / dyed.

I used Semi-Gloss Black spray paint for the plastic.

AS for harnesses.... I dont know, I cant seem to get in contact with anyone at Willans to order new harnesses so I am kinda undecided right now..

Reggie@MWDesign · 03-18-2012, 01:01 AM

soo got my some of my goodies from Mike@K-Tuned!

K-Tuned Billet TPS Version 2
K-Tuned Billet RBC TB Adapter
K-Tuned Upper Coolant Housing with Filler Cap & -16AN Fitting
K-Tuned Lower Swivel Coolant Housing with -16AN fitting
K-Tuned Billet Throttle Cable Bracket with K series DC2 length cable
K-Tuned Coolant Recirculation Hose

Other things I've done was I got all the seals, chain, guides, tensioner and some of the gaskets.

I had my valve cover powder coated Project Mu Teal as well as my Circuit Hero K-swap intake pipe. Also had -10AN bungs welded to the back of the valve cover for my oil catch set up.

The motor and transmission has been dressed up in hardware by Frank@Downstarinc!

Well here are how things are looking for now! still some things to change such as the coil cover, and the valve cover hardware.

As you can see in the following photo there is a big difference from the OEM 62mm bore of the manifold opening to the 74mm Bore of the Skunk2 TB. Can't wait to get it back all port matched =P

Project Mu Teal Valve cover and Intake Pipe

Time to drop it in!

what are your guys opinions with how things are so far?

Thanks for your guys support!

:hug:

**94ex-vtec** · 03-18-2012, 08:20 AM

My opinion = AWESOME looking

Keep the parts and pictures coming!!!

**TheHatchMan** · 03-18-2012, 08:32 AM

Car looks like sex! Did you powder coat the valve cover or just get it painted? Either way it looks bad ass. You got one formidable Integra.

Reggie@MWDesign · 03-18-2012, 09:33 AM

Quote:

Originally Posted by TheHatchMan

Car looks like sex! Did you powder coat the valve cover or just get it painted? Either way it looks bad ass. You got one formidable Integra.

Thanks man!

Yes the teal is powder coated

xk20a · 03-18-2012, 10:46 AM

Looking good REGGIE!

**preston** · 03-18-2012, 10:53 AM

those colors on the vc and intake pipe looks sick with the white! love it Reggie

R-Civic · 03-18-2012, 11:50 AM

Sweeeeet man!

EncoreDC5 · 03-18-2012, 11:59 AM

Car is badass!!!

flesh199 · 03-18-2012, 03:46 PM

awesome car

Reggie@MWDesign · 03-18-2012, 10:27 PM

Quote:

Originally Posted by preston

those colors on the vc and intake pipe looks sick with the white! love it Reggie

Thank you!

Quote:

Originally Posted by EncoreDC5

Car is badass!!!

I hope to not disappoint if its not good enough after its all back together!

**preston** · 03-19-2012, 04:14 AM

Quote:

Originally Posted by Reggie@MWDesign

Thank you!

I hope to not disappoint if its not good enough after its all back together!

i don't think that's possible, judging by the parts pile in your room and after we've already seen!

**RML-2.0** · 03-19-2012, 04:20 AM

pretty sick setup.

Reggie@MWDesign · 03-27-2012, 05:46 PM

Got Trillion Industries to Port my RBC manifold and K-Tuned Adapter.

OEM RBC Bore is 62mm, and I had a 74mm Skunk2 TB and the K-Tuned RBC/RRC TB adapter was a 70mm bore...

So I had Derek@Trillion Bored my RBC to 70mm since thats the biggest that you should be going before you get to close to the IACV port. Then he taper bored the K-Tuned Plate from 70mm to 74mm to port match the Skunk2 TB!

as of right now motor and everything has been taking out again as I decided that the subframe was gross... and i sent that to powder coating as well! along with some other things.

And now you guys after scrolling through everything are caught up with how things stand as of March 27th, 2012

With that said here are some quick shots of the Circuit Hero / ASC metal shop Custom 3-Point Strut Bar for DC2, these are veryyyy limited and I am the first in Canada to have one of these done for me! Thanks Gil!

It is currently raw in these photos so you can see all the welds and such, but it is currently at Calgary Powder Coatings also with the other parts I am getting coated

**Leemoney** · 03-27-2012, 05:55 PM

NICEEEEEEEEEEEEEEE

AWOC · 03-27-2012, 06:13 PM

Nice bar!

**bodyman** · 03-27-2012, 06:33 PM

Reggie ,this thing look amazing! I'm in love!

**bodyman** · 03-27-2012, 06:35 PM

03-15-2012, 11:48 AM	#121
crazyjetsfan22 Recaro Fiend Join Date: Jul 2007 Location: NY Posts: 5,860	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Interior looks great! I need to paint my interior soon! What are you doing about the seat belts? __________________ My EK Build thread!

03-15-2012, 12:11 PM	#122
TheKhemist K20a.org Advanced User Join Date: Jan 2010 Location: NC Posts: 559	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! What did you use for the plastics to get them black? Looks good! __________________ My First Build: K20 Integra

03-18-2012, 01:01 AM	#124
Reggie@MWDesign New Member Join Date: Apr 2011 Location: Calgary, AB Posts: 78	MOTOR IS IN! MARCH 18th soo got my some of my goodies from Mike@K-Tuned! K-Tuned Billet TPS Version 2 K-Tuned Billet RBC TB Adapter K-Tuned Upper Coolant Housing with Filler Cap & -16AN Fitting K-Tuned Lower Swivel Coolant Housing with -16AN fitting K-Tuned Billet Throttle Cable Bracket with K series DC2 length cable K-Tuned Coolant Recirculation Hose Other things I've done was I got all the seals, chain, guides, tensioner and some of the gaskets. I had my valve cover powder coated Project Mu Teal as well as my Circuit Hero K-swap intake pipe. Also had -10AN bungs welded to the back of the valve cover for my oil catch set up. The motor and transmission has been dressed up in hardware by Frank@Downstarinc! Well here are how things are looking for now! still some things to change such as the coil cover, and the valve cover hardware. As you can see in the following photo there is a big difference from the OEM 62mm bore of the manifold opening to the 74mm Bore of the Skunk2 TB. Can't wait to get it back all port matched =P Project Mu Teal Valve cover and Intake Pipe Time to drop it in! what are your guys opinions with how things are so far? Thanks for your guys support! :hug: __________________ The Build: http://forums.nwp4life.com/zerothread?id=31073 Sponsored By:Circuit Hero \| Rywire \| K-Tuned \| The Speed Syndicate \| Downstarinc \| FourPlusOne

03-18-2012, 08:20 AM	#125
94ex-vtec Lifetime Member Join Date: Aug 2006 Location: I 8 UR V8 Posts: 1,677	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! My opinion = AWESOME looking Keep the parts and pictures coming!!! __________________ My Ultimate ITR Rotrex build thread http://www.k20a.org/forum/showthread...=1#post1669062

03-18-2012, 08:32 AM	#126
TheHatchMan Lifetime Member Join Date: Aug 2010 Location: EAST COAST Posts: 149	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Car looks like sex! Did you powder coat the valve cover or just get it painted? Either way it looks bad ass. You got one formidable Integra. __________________ MY EK - AKA BLACK SANTANA

03-18-2012, 10:46 AM	#128
xk20a K20a.org Basic User Join Date: Jul 2006 Location: Vancouver, BC Posts: 226	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Looking good REGGIE! __________________ 95 Civic EG - K20A2 - SVM 212 - PRC IM - 2.5" - 243whp/168tq APL Motorsports / OTC Material

03-18-2012, 10:53 AM	#129
preston Lifetime Member Join Date: Jun 2009 Location: minnesota Posts: 4,368	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! those colors on the vc and intake pipe looks sick with the white! love it Reggie __________________ Vouches: Scott@HPT, K-serious-Eg, 93civichb, eg6k20a2, ReDeMoN, JDMciv'bomb, Clean EH2, Bodyman, BlackNDecker, mr fobster, filipinop1405, importracer2123, 1320whtrex, justtheshop, negrok20r, rexthermal, darqnez, Acurazor, Dube Built. K24/K20 rebuild in progress

03-18-2012, 11:50 AM	#130
R-Civic K20a.org Advanced User Join Date: Sep 2007 Location: Spikecity Posts: 583	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Sweeeeet man! __________________ Streets Finest projects: http://www.k20a.org/forum/showthread.php?t=46678

03-18-2012, 11:59 AM	#131
EncoreDC5 New Member Join Date: Jul 2010 Posts: 43	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Car is badass!!!

03-18-2012, 03:46 PM	#132
flesh199 K20a.org Basic User Join Date: Apr 2005 Location: quebec/canada Posts: 366	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! awesome car __________________ Allmotor k24/k20 built not bought 279whp 207 torque SAE CORRECTED (94 octante) http://www.youtube.com/watch?v=mJ8jWrX0UwE

03-19-2012, 04:20 AM	#135
RML-2.0 dat ass Join Date: Aug 2007 Location: Cincinnati, Ohio Posts: 24,849	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! pretty sick setup.

03-27-2012, 05:46 PM	#136
Reggie@MWDesign New Member Join Date: Apr 2011 Location: Calgary, AB Posts: 78	March 27, 2012 UPDATE Got Trillion Industries to Port my RBC manifold and K-Tuned Adapter. OEM RBC Bore is 62mm, and I had a 74mm Skunk2 TB and the K-Tuned RBC/RRC TB adapter was a 70mm bore... So I had Derek@Trillion Bored my RBC to 70mm since thats the biggest that you should be going before you get to close to the IACV port. Then he taper bored the K-Tuned Plate from 70mm to 74mm to port match the Skunk2 TB! as of right now motor and everything has been taking out again as I decided that the subframe was gross... and i sent that to powder coating as well! along with some other things. And now you guys after scrolling through everything are caught up with how things stand as of March 27th, 2012 With that said here are some quick shots of the Circuit Hero / ASC metal shop Custom 3-Point Strut Bar for DC2, these are veryyyy limited and I am the first in Canada to have one of these done for me! Thanks Gil! It is currently raw in these photos so you can see all the welds and such, but it is currently at Calgary Powder Coatings also with the other parts I am getting coated __________________ The Build: http://forums.nwp4life.com/zerothread?id=31073 Sponsored By:Circuit Hero \| Rywire \| K-Tuned \| The Speed Syndicate \| Downstarinc \| FourPlusOne

03-27-2012, 05:55 PM	#137
Leemoney Swag Champ Join Date: Dec 2009 Location: Pon Di GaZa Posts: 6,018	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! NICEEEEEEEEEEEEEEE __________________ DC4 INTEGRA BUILD--->http://www.k20a.org/forum/showthread.php?t=74074 Sold To: TurbanRacer,Remyrounds, b18c, 2217,Lexxi_TegK24, ReppinDa(603),Chompy,ltp0620,purpej1

03-27-2012, 06:13 PM	#138
AWOC K20a.org Advanced User Join Date: Mar 2009 Location: New Hampshire Posts: 653	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Nice bar! __________________ Stance = Ricey

03-27-2012, 06:33 PM	#139
bodyman K20A.org Sponsor Join Date: Aug 2009 Location: AFH Posts: 11,524	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! Reggie ,this thing look amazing! I'm in love! __________________ email Rdoolin@autofair.com us on FACEBOOK www.afhKparts.com KARCEPTS - P2R - K-TUNED KSWAP PARTS INSTOCK MTEC RACE springs $35 shipped RRC intake manifolds instock! - New JDM DC5R flywheels Denso RSX-S wideband A/F sensors $119 shipped New 04 RSX-S engine harness $279 shipped REMFLEX K-series exhaust gaskets S2K START button/harness/bezel - K24 Chain guides only $89 shipped! RDX injectors/oem clips - RSX oil pump conversion's instock

03-27-2012, 06:35 PM	#140
bodyman K20A.org Sponsor Join Date: Aug 2009 Location: AFH Posts: 11,524	Re: //FourPlusOne - Reggie's JDM K20A Powered 1998 Integra Type R Complete REDO! __________________ email Rdoolin@autofair.com us on FACEBOOK www.afhKparts.com KARCEPTS - P2R - K-TUNED KSWAP PARTS INSTOCK MTEC RACE springs $35 shipped RRC intake manifolds instock! - New JDM DC5R flywheels Denso RSX-S wideband A/F sensors $119 shipped New 04 RSX-S engine harness $279 shipped REMFLEX K-series exhaust gaskets S2K START button/harness/bezel - K24 Chain guides only $89 shipped! RDX injectors/oem clips - RSX oil pump conversion's instock