Honda / Acura K20a K24a Engine Forum banner
Cancel
Create thread New Garage Forums

2009 TSX parts info

Jump to Latest
12K views 31 replies 7 participants last post by  m_shake  
M
#1 ·
Bored at work so i'll post some 09 TSX part numbers that fit multiple applications.

Crankshaft- 13310-R40-A00(supersedes 13310-PPA-000) It's the same as 03-11 accord, 02-10 CR-V, 03-10 element.
Rods- 13210-R40-A00 It's the same as 08-11 accord, 10 CR-V
Main Bearings- Same as all RSX, all TSX, 08-11 accord, 06-10 Si, 10 CR-V
Rod Bearings- Same as all TSX, RDX, 08-11 accord, 10 CR-V
Piston Pin- 13111-PNA-010 It's the same as 03-09 accord, 02-10 CR-V, all RSX, all TSX, 03-10 element
Crank Pulley- 13810-R40-A02 It's the same as 08-11 accord, 10 CR-V

I'll check someother parts later and post up more info.:dance:
 
M
#2 ·
Alight, time for some cylinder head numbers.

Bare cylinder head- 12100-R40-A02 Same as 08-11 accord, 10 CR-V
Valve Spring Seat- 14775-PCX-000 Same as 08-11 accord, 10 CR-V, 06-10 Si
00-09 S2000
Ex Valve Spring- 14762-R40-A01 Same as 08-09 accord, 10 CR-V
In Valve Spring- 14761-R40-A01 Same as 08-09 accord, 10 CR-V
Retainer- 14765-R40-A00 Same as 08-11 accord, 10 CR-V
LMA- 14820-PNA-003 Same as 08-11 accord, 06-10 Si, 10 CR-V, all RSX, all TSX
Intake mani(plastic part)- 17100-R40-A00 Same as 08-11 accord, 10 CR-V
VTC Actuator(gear)- 14310-R40-A01 Same as 10 CR-V
 
#14 ·
OS if possible.
m_shake said:
For those of you have been asking what set A and Set B means, I have an answer.
Honda has 2 different standard size pistons, since I don't work @ acura I can't give you there specs, but I can give Accord/CR-V spec:

No letter or A: 86.980－86.990 mm
Letter B: 86.970－86.980 mm

I would assume the tsx would be the same.
Click to expand...
Did not know that! Good stuff :up:

m_shake said:
Does anyone know what 09 tsx pistons weigh?
Click to expand...
You probably have the best chance to weigh one :rolleyes: :)
 
M
#11 ·
For those of you have been asking what set A and Set B means, I have an answer.
Honda has 2 different standard size pistons, since I don't work @ acura I can't give you there specs, but I can give Accord/CR-V spec:

No letter or A: 86.980－86.990 mm
Letter B: 86.970－86.980 mm

I would assume the tsx would be the same.
 
M
#17 ·
Ok, so i've recieved some questions concerning the crankshaft difference between the pre08 accords and 08+accords. The older accords, crv, element, used crank part number 13310-PPA-000, but this part has been replaced by part number 13310-R40-A00(new accord, tsx) So if you go into honda to order a new crank for a 03 k24a4, you'll be getting a 08+ accord crank. BTW msrp on 13310-R40-A00 is $324.29 :)
 
S
#18 ·
So essentially all of the previous K24 Crank Shafts have been phased out, and if you decide you need a replacement/upgrade crankshaft-this will work for all older K24 Crank Shafts, as its now the only one available. Which is nice to know...

So after researching and merging info from the OEM honda parts retailers and Nikos' find [click here]:

Honda Says it's a direct bolt in for older K24s

Nikos Page says its slightly lighter

Combining the two together means that its essentially a direct bolton to older K24s, and has its advantages of weight reduction as well. :up:

EDIT: I guess I was thinking the one on the left is the Old, and the NEW was on the right. Pics weren't labelled, so I'm not sure how I came up with that assumption.
 
E
#24 ·
you sure cranks interchange on old cause crank sensor on old is on front crank nose and on new Accord/TSX its in back by flywheel .

I thought the new Z3 cams and head are not inter changeable with older motors cause of how front cover and were chain sprocket lines up .

Edit: you might be right i just looked and Z3 has a spacer on front that might match thickness of old pulser ring
 
M
#29 ·
I called them this morning because I was looking for a price quote on 06 rods, 09 pistons and 09 rings.

From what I remember regarding the piston rings, they told told me that they could order them and they were priced as a package for $192, but I don't know if this also meant that they were available.

I'll double check with part #'s too.
 
Honda / Acura K20a K24a Engine Forum
posts
2M
members
99K
Since
2000
A forum community dedicated to Honda and Acura K Series engine platform owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, power-adders, racing, maintenance, and more!
Full Forum Listing
Explore Our Forums
Parts for sale All Motor K series Technical Discussion 1992+ Civic EG / DC2 / EK K-Series Swap General K-series related talk Parts Wanted