Come on guys...help out the guys who need to get up and running by posting your specific kpro calibration in the appropriate format.
Please note that it is essential to include a full description of your build so our members can best match their setups from the ones posted.
(ex. STOCK 2002 k20a2 prb ecu, 12" short ram intake, hasport header with 2.5" full exhaust, no cat, fuel pressure at 51psi, this is only an air/fuel ratio tune at 71*F).
To get the PERFECT calibration for your car, go to a dyno and tune!!!
Disclaimer: Every setup, no matter how similar... is DIFFERENT. The calibrations listed are intended for temporary purposes only. Only you are to be held responsible and accountable for any mishap that occurs using any calibration off of this site.
i need a map for a
k24a1 bone stock no oil pump mod or anything
k20z1 head nothing done internaly
ssr tri y header
with rsr mid pipe...basically open headers
wanna see if anyone has a map similar to my set up..pm me or just post on here if you do
jdm k20a
91 octane
karcepts cold air intake
skunk2 pro series intake manifold
skunk2 70mm throttle body
stock 310cc injectors
r crew race header
2.5 inch piping
hey fellas, anyone would like to share a tuning map for a stock k20 with ips k2 cams, toda header, greddy 2.75in exhaust, toda throttle body, 440cc injectors, rbc manifold thats better than the kpro base map. thanks. Does anyone know what would be the whp im expecting from this set up when tuned? thanks again
Hey what's up every I need something to get me though for bout 2 weeks till I get paid for a dyno n tune if anyone can help would be great my mods r
K20a3 block stock
K20a head
Aem v2
Ssr headers
3in exhaust
50 psi fuel presurre I think
310cc
Need something to make it run less rich till the 19th if anyone can help would be great if it matters in colorado spings
hi tomzauto
could u tell me how to download my map/tune ?
iv recently got it tuned and lost 33kw at 6000rpm and my vtec is now at 6800 wen it use to be at 4000 i just want som 1 to look over it and tell me if anything is wrong . and of course i will pay.
Hey everyone
I havent been on here in awhile. I was wondering if anyone has or knows someone who has a base map or calibration for a turbo setup they can let me use, those of you with Kpro. I have an 05 Accord with K24A4, stock internals. Ill be putting these parts on my car sometime in February and am in need of a basic tune to get me to a DYNO shop. Most likely Bisimoto. Heres a list of the parts that ill be putting.
-Hondata Kpro 02 -04 RSX-S
-Cham custom Split Harness
-750cc RC Injectors
-HKS GT2835/GT3071 w/ T3 turbine
-Walbro 255lph fuel pump
-Rev Hard Manifold
-Rev Hard downpipe, cat delete
-AEM fuel rail
-Tial 38mm wastgate 7psi spring
-Godspeed same side in/out FMIC
-Custom IC piping HKS BOV
-Vibrant 3" Exhaust with Ultraquiet resonator
-04 TSX intake Manifold
-Hondata boost solenoid
For my Lotus Elise S1, Sunspeed kit I need a map for:
K20a type R, Integra JDM
Burns exhaustmanifoil 4-1
Burns exhaust 3"
KN-filter
55 psi fuel
Hondata K-pro (PRC)
sup guys i dont know if your still doing but but if you are..........
2004 k20a2 full crower head stock block
2006 k20z1 tranny hybrid racing speed convertor
RDX 410 injectors
BS hytech replica header 2.5 outlet to 3" exhaust all the way back 22" resonator
rbc intake manifold ktuned cold air intake
kpro ecu 02 sensor not installed
i currently have codes
P0563 VBU voltage high and
P0340 CMP no signal
have been trying to get rid of them but i dont know what the problems are...
thank you very much
BTW the lotus above me is very niceeeee:up::up::up::up::up::heart::heart:
Hey i just traded my 240sx for a k24a4 dc2 and i think i need a tune for kpro. From what i was told and looking over the motor its has the following:
DC headers
stock exhaust
rsx-s cams
stock i/m
RC 550 injectors
Golden Eagle fuel rail
Walbro pump
Hybrid Racing 74mm throttle body
wiseco pistons
no a/c, no p/s
He also gave me a Jackson Racing s/c. I dont know what size pulley its got tho, but if possible i'd like a basemap for that as well.
If anybody can help me out, I really need a map for a k20a2 head/ k24a1 block all stock. Intake, dcrh, 2.5'' exhaust. JRSC 9 psi, 550 cc's.. Thanks guys I really would appreciate it.
k20z1, stock block
bc stage 2 cams
skunk2 valve springs
golden eagle headstuds
rcrew header
rbc intake manifold
70mm tb
ktuned fuel seutp can set fp to what is recomended
type s trans
2.5 in exhaust with cat
p2r thermal intake gasket
custom short ram intake
no secondary 02/obd2 disabled
stock type s injectors
Hey Tom, need your help again. I pulled of the s/c and im gonna run n/a and need a basemap.
k24a4
dc sports headers
74mm throttle body
550 injectors
type s cams
I tried playing with kmanager and put stock k24a4 tune and it ran shitty and wouldnt rev over like 3k and then tried stock tsx tune, little better but still wouldnt idle right. Gave me 3 error codes, 2 for o2 sensors and 1 for some daughter board issue. Any help would be appreciated. Thanks in advance.
Also, whats the fuel pressure supposed to be set at for k24a4?
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda / Acura K20a K24a Engine Forum
2M posts
94.7K members
Since 2000
A forum community dedicated to Honda and Acura K Series engine platform owners and enthusiasts. Come join the discussion about performance, modifications, troubleshooting, power-adders, racing, maintenance, and more!