PDA

View Full Version : s2000 pistons in k24 ? Mount ?'s EG 1st post

V8KO
02-24-2004, 01:48 AM
Hey guys K20EG led me to this site...thanks.......again lol.

Well were just starting to build a k24/k20 head engine. Actually the engine has yet to arrive. We thought perhaps that the s2000 pistons might fit into the k24 block...any thoughts?

We'll be able to find out more once the engine arrives but hey thought Id ask.

Anyone have any comments on perhaps some pit falls to look out for, or perhaps a little knowledge on maybe getting a few more horses without making me completly broke :P

BTW any thoughts on these mounts?

http://www.imagestation.com/picture/sraid104/p09863f285b50c21a9e82374707678416/f9878620.jpg

I was also wondering if anyone is going to break the rules and not go with the urethane mount inserts...I was thinking of something with more of a stock feel.[/img]
d3viL666
02-24-2004, 04:50 AM
hey man i really need 2 k24 block ere...by any chance u can spare me 1..?? i am from malaysia..i am also planing to do the same mods as u..so i hav a spare or a source pls do tell me k.

Thanks!
nikos
02-24-2004, 04:54 AM
hey man i really need 2 k24 block ere...by any chance u can spare me 1..?? i am from malaysia..i am also planing to do the same mods as u..so i hav a spare or a source pls do tell me k.

Thanks!

In malaysia, there is a store called flash options.. Have you heard it? I know they carry a lot of engines....

They have stolen from many people in the US but since you are there, I am sure you could pick up the engine yourself. :)
V8KO
02-24-2004, 10:09 AM
errrr....thanks for the reply guys.... :roll:

Really though there has to be some info on this yes, no?
V8NV
02-24-2004, 01:25 PM
Hey guys K20EG led me to this site...thanks.......again lol.

Well were just starting to build a k24/k20 head engine. Actually the engine has yet to arrive. We thought perhaps that the s2000 pistons might fit into the k24 block...any thoughts?

We'll be able to find out more once the engine arrives but hey thought Id ask.

Anyone have any comments on perhaps some pit falls to look out for, or perhaps a little knowledge on maybe getting a few more horses without making me completly broke :P

BTW any thoughts on these mounts?

http://www.imagestation.com/picture/sraid104/p09863f285b50c21a9e82374707678416/f9878620.jpg

I was also wondering if anyone is going to break the rules and not go with the urethane mount inserts...I was thinking of something with more of a stock feel.[/img]
................... is there any response to this particular question....but i do have to say the responses were funny... just not helpful.
K20EG
02-24-2004, 09:42 PM
What up bro

those arent my mounts

...
V8KO
02-25-2004, 01:13 AM
What up bro

those arent my mounts

...

BUSTED. Hey man. Actually were not sure which mounts to choose...just looking for some insight. :D
d3viL666
02-25-2004, 05:29 AM
In malaysia, there is a store called flash options.. Have you heard it? I know they carry a lot of engines....

They have stolen from many people in the US but since you are there, I am sure you could pick up the engine yourself. :)[/quote]

hmmphh...nope if u dont mind can u try giving me the address plss..or any contact where is this place located or contect persons number...thanks..very very much
brian g
03-16-2004, 09:28 PM
. We thought perhaps that the s2000 pistons might fit into the k24 block...any thoughts?



The pistons will fit, but the super long stroke of the K24 combined with the high pop-up dome on the S2000 piston would most likely yeild an excessively high compression ratio.

brian g
V8KO
03-17-2004, 12:54 AM
The pistons will fit, but the super long stroke of the K24 combined with the high pop-up dome on the S2000 piston would most likely yeild an excessively high compression ratio.

brian g

Hmmm. Well we decided to go a different route. What do you think of 11.1's in there?

Thanks.
nikos
03-17-2004, 08:28 PM
In malaysia, there is a store called flash options.. Have you heard it? I know they carry a lot of engines....

They have stolen from many people in the US but since you are there, I am sure you could pick up the engine yourself. :)

hmmphh...nope if u dont mind can u try giving me the address plss..or any contact where is this place located or contect persons number...thanks..very very much[/quote]

www.FlashOptions.com

Tel : 011-60-12-3896600
Fax : 011-603-42525225

E-mail :-
info@flashoptions.com

BE CAREFULL THOUGH!! THEY HAVE STOLEN FROM US BUYERS!! DO NOT GIVE THEM MONEY IN ADVANCE!!!